Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   FE TALK (http://www.clubcobra.com/forums/fe-talk/)
-   -   Serial Number on FE? (http://www.clubcobra.com/forums/fe-talk/95754-serial-number-fe.html)

jlb454 03-24-2009 03:43 PM
Serial Number on FE?
 
Where would I find the serial number on an FE block? I found the casting number, is that the same? I need it for NJ registration, but it asks for the serial number not the casting number. Thanks!

FWB 03-24-2009 04:34 PM
there isn't one, just casting #

rustyBob 03-24-2009 05:33 PM
Some 428 blocks had a serial number on a pad at the rear of the block on the drivers side that was hand stamped you could make one up and stamp your block in the same place but i dont know if that would work for them or not

FFR428 03-25-2009 11:21 AM
Quote:
Originally Posted by rustyBob (Post 933525)
Some 428 blocks had a serial number on a pad at the rear of the block on the drivers side that was hand stamped you could make one up and stamp your block in the same place but i dont know if that would work for them or not

That was a partial VIN number and was stamped into some 390's as well.

rustyBob 03-25-2009 01:50 PM
you are correct ffr428...my mistake...sorry

elmariachi 03-25-2009 10:16 PM
My 1966 427 side oiler, which came from a 1967 R-code Galaxie, has the car's VIN # stamped on a flat boss on the passenger front side of the block just below the head, see below (I left the "R" but photochopped the rest so no one comes knocking trying to claim it given that I bought it out of a barn in South Texas.) It also has the casting date in the normal spot, and another date stamp of October 19, 1967, which I assume is when it was put in the car given that the VIN checks out as a fall '67 production car.

http://farm4.static.flickr.com/3287/...f58e433b_o.jpg


All times are GMT -7. The time now is 03:47 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: