|
Post video of your FE running !
Let's hear and see a video of you FE Cobra running. I have a small clip of mine but I will be taping a new video soon.
I bought a Mickey Thompson aluminum connecting rod for $10, to mount on my roll bar and attache my camcorder to it. I will show it a start up in the garage, idling, down the street and on the highway. So, post yours ! :cool: |
Whats the web site for the camera mount ? Thanks
|
Lame, but better than nothing...
This is truly a half-ass video of my FE: http://208.255.159.239/fe.wmv
|
1 Attachment(s)
It's just a private seller I found while surfing the web. I have a old tripod for my camcorder that I will be tapping into the connecting rod. It will tilt and move 360 degrees. The journal end is larger than my 2" roll bar so I'm going to lathe a bushing for it. I will protect the chrome using some rubber sticky back sound proofing material I used for my truck stereo install. Should be pretty cool.
|
Zip Ties
The few times I've videoed from my cars I've found that zip ties work great. You use several of them to get the camera nice and tight and safe -- then just cut them off when you're done. Cheap, easy, and effective. Of course, not quite as cool as a dedicated roll-bar mount....
|
Backing onto the dyno
http://www.youtube.com/watch?v=U5bhvBb1OQA Dyno pull. 50' away, one loud MF.......... (Howe racing mufflers) http://www.youtube.com/watch?v=y88fPXB2m7M |
|
I think I won...
I think the mere fact that I was able to hold a timing gun on the marks while simultaneously videoing with my Blackberry in the other hand makes me the winner of this contest.:cool:
|
Fe
|
A friend driving my cobra in Kansas at the Hot Rod Power Tour last summer. It's the first time he's ever got on it. lol.
h3XsqHrtTPY&feature=channel_page |
Kit Cars Mexico- what a frickin Kirkham you have !
Beating the pants off that dedicated race Barracuda was awesome ! :D Great site too ! |
Quote:
Thanks Kevin !!! Alfredo Canalizo www.kitcarsmexico.com |
Here is a customer engine on the dyno.... not super powerful at 530 horsepower, but really cool engine to see and hear.
Lots of noise from the dyno cell fan - sorry 'bout taht. This was a tuning pull - you can watch the March pulley kit "flex" under load - needs a rearward support bracket - and it gets cool around a minute into the video after warm up. http://www.youtube.com/watch?v=PvZAS...e=channel_page And one of my EMC entries from a few years back. This one was a little nastier at 752 horsepower.. http://www.survivalmotorsports.com/EMC_Dyno_Pull.html |
Idling
|
|
|
|
|
old video
This is a video of my first aluminum engine, car had light springs and relatively stiff bars.
http://s954.photobucket.com/albums/a...rent=Cobra.flv |
Very nice and great driving on the course !
|
| All times are GMT -7. The time now is 08:29 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: