K&N Breathers and PCV manifold adapter

[RodgerH]

Anyone know where to get the K&N breathers that go in the baffled holes in cast aluminum valve covers? The holes have opposing notches for twist lock breathers.

How about a K&N breather that fits the oil fill tube on the front of the FE manifold? (To replace the chrome push-on breather.)

And......where can I get the PCV mounting adapter that goes in the opening on the rear of an FE manifold?

Thanks-
Rodger

[RodgerH]

Update....I found the breathers.

Any help on the PCV fitting for the manifold?

Rodger

[FWB]

a basket and breather was what was in there from stock. there may be a plate out there to put a pcv in. if you don't find any get a pcv valve and a grommet and my shop can machine one for you.

Fred

www.origincorp.net

[xlr8or]

Rodger you can get the plate and PCV from George at Gessford Machine.

[undy]

Here's what I'm running. The PCV fits in the top in a regular grommet.
http://store.summitracing.com/partde...5&autoview=sku

Dave

[FFR428]

www.actoncustom.com Nick makes a nice aluminum cover plate w/ PCV and grommet.

[GEORGE ANDERSON]

Rodger it shipped today 6/16/09

Thanks, george
http://www.gessford.com/cobra/images/KERN-01444.JPG

[RodgerH]

George,

Received it today. Beautifully machined items! Thanks! Looks great on the engine...and I'm sure it will work equally as well.

Unfortunately the 12-pt SS ARP bolts you sent with it make the rest of my fasteners look pitiful. (I thought they looked good before. )
Time to place an order with ARP.
Rodger