|
Terry....I will measure when I get home tonight and reply....if you have a potential solution I be most appreciative..
|
Kramer:
I don't know if it's a solution or not - My horns are 3 1/16" outside-to-outside. I added a grommet to increase the size (better fit for the filter) up to 3 1/4" o-to-o. Still a bit loose. I think the best, snug fit would be a horn size of about 3 1/2+." Now, depending on your size .......................... |
Terry.....measured the outside to outside diameter of the stacks.....four and a quarter inches. I spend the day looking around at different filters. I am thinking about using some smaller auto filters and fabricating brackets with clips that will mount to the air horns....Don't know if the measurements help but any thoughts would be appreciated.
|
Most can tell I'm not a tech person and I don't know how to post pictures but there is a picture of my car and a kroyer engine with the alum plate ness to mount if you go to finish line motorsports las vegas and click on comp car and then go to blue (here). Picture will come up, twm is doing the same thing I'm told. Sorry for choppy post, at least it matches the rest
|
I think this is the site that o'brian is talking about above...
http://www.finishlinecobraslv.com/comp_427_specs.html |
Thanks guys...don't know when but I checked the site out before. I am really hoping to find some simple solution with one filter per horn, but if not I may to do something similar.
Kramer |
Finishline is who did mine. If you take the tops of the filters off, that is exactly how mine looks. I simply bought another set of horns and had them polished for show!
|
|
flared top horn screen filters
Kramer, Sorry I didn't see your post sooner. Here are a couple of screen options that will keep the engine wrecking stuff from getting sucked in. Unlike the Weber type screens that use up 80 to 100 hp, the loss with these is negligible. I can get these for you without taking your firstborn. Hope this helps
http://www.clubcobra.com/photopost/d...409_Small_.jpg http://www.clubcobra.com/photopost/d...1_7_Small_.JPG http://www.clubcobra.com/photopost/d...1_1_Small_.JPG http://www.clubcobra.com/photopost/d...1_3_Small_.JPG |
| All times are GMT -7. The time now is 07:34 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: