Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Great Lakes Cobra Club (http://www.clubcobra.com/forums/great-lakes-cobra-club/)
-   -   Great Lakes Cobra Club (http://www.clubcobra.com/forums/great-lakes-cobra-club/14709-great-lakes-cobra-club.html)

Bill Wells 01-31-2003 07:14 PM

carroll...you have mail. bill.

Scott Evans 02-01-2003 06:32 AM

We're waiting for the sun like everyone else. Just got back from a week in Phoenix, now that's where you enjoy our rides 12 months a year! Our local group met once last fall. About 30 cars with some more in the build stage. Trying some organization but need a few guys like you to do some of the "pushing". Guess I better get my dues in to you so I can get a spot for the Deraem Cruise. All the best.

Carroll DeWeese 02-01-2003 07:16 AM

The GLCC is open to all with an intersest in Cobras and that can put up with the club members. That last requirement is not too tough. Maybe I have low expectations, but I like every club member that I have have had the opportunity of meeting. In fact, one of the reasons that my wife and I decided to get a Cobra is that we liked the club members so much.

If you want to park with the Cobras at the Dream Cruise, you must be a club member. Our members are not limited to the "local" area.

It is an active Club and getting more active. The club participates in various charity events and lots of other activities.

Those who have not paid their dues for this year need to do so. The culb is planning another active year.

trularin 05-21-2003 10:18 AM

To PJS50
 
LSM did my engine work. They appear to do very good work.

I blue printed the engine myself and specified the work to be done.

If you do not know what you are doing with the engine, you may want to ask Mike for help.

If I may ask, what do you want in an engine?

Trularin

:3DSMILE:

PJS50 05-21-2003 11:56 AM

Well Trularin,
I already have the motor which is a '69 390 FE... 50,000 original miles that has been sitting in my garage (with C-6 auto mated to it) for about 15 years now...
I plan on using the Edelbrock 428 heads & RPM mainfold. LSM was going to "custom grind" me a Hyd. roller cam for the above. I am toying with the idea of stroking it to 410 with the Scat set-up but that is still just a "maybe" thought... I am going to have LSM do all of the machine work and probably have them assemble at least the bottom end (maybe the whole thing)... I was just wondering if anybody out there who was close by has had them do any work and how it turned out...
I have talked to Steve at LSM on many different occasions and he sounds very knowledgable and I understand that they do some pretty wonderful things (like make their own aluminum blocks) in their shop, I was just trying to see if they had built any FE's out there... In fact, I taked to Steve again about a month ago and he said they just built an FE for somebody out of state I think...
I would LOVE to get 450 HP (at the flywheel) if I could to put it in what I am hoping to be a Everett Morrison AC (if THEY ever come back)...
Sound unreasonable?
If you know anybody that needs a C-6 auto for an FE let me know... It's a boat anchor to me and like I said, this C-6 is "cherry" and has never been unmated from the motor EVER... In fact, the first 36000 mile on that trans was done by a grandmother....

trularin 05-21-2003 02:34 PM

Sounds heavy
 
Well, the 390 will be a strong one.

LSM did me just right. Each bore was within .002" and the balance was right on.

I talked to Mike all the time.

You may want to call Lone Star to put that in. They have a nice full race chassie that will take the 390.

Hope this helps.

Trularin
:3DSMILE:


All times are GMT -7. The time now is 11:05 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: