![]() |
I think I broke my Mallory 6AL
I don't know if any of you guys have done this? I fitted the Mallory 6AL (I already have a mallory HEI dizzy) I forgot to connect the ground wire! The engine started, and ran OK, I checked the timing, went to adjust the timing and got a big shock when I touched the dizzy:mad: It then stopped, and hasn't worked since, so I'm running direct through dizzy at the moment.
Any ideas? Blown fuse inside 6AL maybe? Any help would be greatly appreciated, Mark |
if you can run off the distributor why do you need the box ????
i have a Mallory dist. and dont need a box for it... i know that dosent answer your question but... |
Hi Bob, you're right, but I hate to buy something (that I thought would improve performance (probably read way toooo many tuning books!))
But, yeah it works fine as it is, and I'm never going to rev that engine to the max, so it probably was not worth me buying it in the first place. But, as I have bought it (if it's a simple fix) i'd like to use it. As a side note, looking at lots of engine pics on the UK Cobra club, nearly everybody uses them (or MSD) Mark |
Mark; did you do the test procedure for the box? Connect it and turn ignition on? The red diode should make a couple (book says three) blinks. Mine looked as it gave two, but Mallory said that was OK...
I never peeked inside a Mallory box (just a MSD) , so I cannot help you with details on what has been fried. Take it apart and have a look; or send it back for repair? (I have a curious mind, so I's go for the first option). However, I would bet that it's something more intricate than a fuse that's gone. Usually some transistor or whatever, and you have to test them all to find out which. RS |
I hope its an easy fix for you....
keep us posted.. |
1 Attachment(s)
Just opened the box, no fuse, or even an LED! As soon as I connect the permanent live wires (marked battery in picture) the Aluminium piece (at the bottom of the circuit board) heats up (rapidly and hot!) This can't be normal I guess?
Mark |
The red test- LED is visible from the outside of the box.
Doesn't sound normal,no... |
| All times are GMT -7. The time now is 07:05 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: