|
KMP625 engine is in; connection questions
The engine went in yesterday and am plumbing it up. I have two questions:
1) Kirkham shifter in TKO600. I need to move the pin and ball from the Tremec stub to the Kirkham sourced shift lever. Do people use a hydraulic press to move it? It isn't moving when I tap it. 2) Three wire Alternator. Besides the hot wire, does green/red go to the black lug and grey wire to the white lug or vice versa? Thanks, Mark |
Mark. See the following link on the shifter. See pages 10-12
http://www.clubcobra.com/forums/show...=80230&page=10 What engine are you using. Do you have the correct input shaft in the TKO600? |
Mine was made wrong. I need to ream the pin hole and spin down the ball. I also needed to turn down the area where the cup fit. I had already polished mine on a lathe so I figured i would do the rest of the work. It looked like the kirkham's sent me a roughly machined piece. I'm sure they would of fixed it for me but since my friend has a lathe we did it ourself. Don't force the cup if it doesn't tap on you may need to spin the shaft
|
It has been a little while since I installed mine but if i remember right, the pin came out with some tapping from a flat punch. I definitely did not have to push on it with a hydraulic press.
|
The pin comes out rather easily (usually). I had trouble installing it in the kirkham shifter
|
Thanks for the comments. I beat on the pin pretty hard and it didn't budge. It's hydraulic press time I think.
Mark |
Mark, -- if you need a press we have one.
Steve |
| All times are GMT -7. The time now is 04:25 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: