|
pedal boxes
do you have any more pedal boxes,power coated or stainless, will steel be less. if so i will call you in the morning. thanks Pete R
|
FE intake manifold breather with 1/2 NPT threaded fitting. The hole is where the cross shaft bolts on for a Weber linkage.
$35 http://www.clubcobra.com/photopost/d...04_Medium_.JPG |
Garage Art!
Original Shelby throttle pedal for a 427 Cobra. We got this out of the left over parts when Shelby went out of business. We only have 3 $100 http://www.clubcobra.com/photopost/d...03_Medium_.JPG |
FE under driven harmonic balancer pulley. This slows down the speed on the harmonic balancer pulley so you drag racers don't smoke your alternator. 5 inches in diameter. We have 5
Retail $100 Today $50 1 SOLD http://www.clubcobra.com/photopost/d...06_Medium_.JPG |
FE water pump pulley. This is the pulley we use with our harmonic balancer pulley. The small diameter speeds up the water pump so you don't overheat your chariot of fire in traffic.
We have 5 Retail $100 Today $75 (this takes a big, expensive billet) 1 SOLD http://www.clubcobra.com/photopost/d...05_Medium_.JPG |
FE intake manifold breather block off plate. We have 2
$5 1 SOLD post 612 http://www.clubcobra.com/photopost/d...08_Medium_.JPG |
FE Oil filter adapter for the block. The original 427 Cobra street cars ran this type of set up. We have 2.
$5 1 SOLD post 612 http://www.clubcobra.com/photopost/d...07_Medium_.JPG |
License plate holder. Goes under the license plate light. Steel.
Retail $35 Today $10 SOLD post 589 http://www.clubcobra.com/photopost/d...10_Medium_.JPG |
David I'll take the license plate holder
Jay |
Oil Vapor Separator Tank. Mounts on the firewall.
Retail $375 Today $175 We only have 5! 1 SOLD post 612 http://www.clubcobra.com/photopost/d...12_Medium_.JPG |
Rear upper control arm covers. Plastic. New
Retail $25 each. Today $10 each. http://www.clubcobra.com/photopost/d...14_Medium_.JPG |
Trailing link covers. These mount behind the seats. Plastic. New.
Retail $25 each Today $10 each http://www.clubcobra.com/photopost/d...16_Medium_.JPG |
Rear rotors and hats. These hats fit our suspension. Used.
Retail $400 Today $200 http://www.clubcobra.com/photopost/d...13_Medium_.JPG |
Here are the brake cans and bracket we have sold so many of on this thread. I finally got a picture of one before they went into a box. These have been selling like mad. Just like us, people are tired of their rusty brake and clutch cans.
Dash 4 fittings on the bottom. Retail $300 cans Retail $50 bracket Today $100 cans (They are NEW, we just made another run). Today $30 bracket (New as well. Just made another run). http://www.clubcobra.com/photopost/d...15_Medium_.JPG |
Garage Art.
Clear Acrylic FE Pentroof Valve covers. Some time ago we did an experiment to see if we could reduce weight by making plastic valve covers. The vacuum forming didn't turn out as well as we wanted. The surface is a bit wavy. We have 2 sets. $35 http://www.clubcobra.com/photopost/d...21_Medium_.JPG |
Wilwood, 12.2 x 1.25 rotor. Cross Drilled.
Retail $150 Today $75 http://www.clubcobra.com/photopost/d...22_Medium_.JPG |
|
|
Post 591 and 592
I will take two of the trailing arm covers and two of the covers that go behind the seats over the control arm bolts. Post 594 Also, if i did not get the billet cans and billet bracket, i would like to upgrade to them. Dont worry about the other cans(the steel ones) I was in for 3 and if you have already mailed them, i will find a use for them.. I need one for the diff anyway. ADDING TO THIS Post 571 Alternator Spacer-one Post 572 Air Cleaner Assembly-One Post 584 Harmonic Dampner Pulley-One and Post 585 Water pump pulley(i think i already requested a pulley, but if this is what will work best with the Harmonic dampner pulley, then i am in for one) One please Smiling from ear to ear!!! Thanks! |
Quote:
Send me an email. Thanks! David :):):) |
| All times are GMT -7. The time now is 06:02 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: