how long? ready to buy!!!!!!!

800hp · #1 (**permalink**) 05-11-2006, 06:18 PM

anybody know how long it takes to get a cobra from kmc i am now ready to get back into the cobra scene again thanks! JIM

HI Cobra · #2 (**permalink**) 05-12-2006, 12:18 AM

You might check with Kirkham directly - I think they do a better job than SCI
in delivering the goods.

redd7 · #3 (**permalink**) 05-12-2006, 04:39 PM

call David at (801) 377-8224. They are finishing my car now. My guess is that they could ship your car in less than 30 days. maybe alot less. I have no inside info, it is just mt experience with so far has been great. They are very reponsive and you can count on them to do their best and do what they say. (My experience anyway) You may want to ask David about their secret project. Very cool, I don't know if it is for sale though. Unless you have an engine already chances are you may have to wait longer for that then the car. If you have any other questions let me know.
Russell

BO DUTCH · #4 (**permalink**) 05-12-2006, 05:05 PM

You just possibly will find that it will take you much longer to register your new cobra in California than it does to order it and take delivery.

Bo

xlr8or · #5 (**permalink**) 05-12-2006, 05:08 PM

Jim it will depend on what you want. 427, 289, slabside etc. If you opt for the stainless steel frame it may take longer but they usually have some cars there in Utah so it's just a matter of assembling them.

800hp · #6 (**permalink**) 05-12-2006, 05:54 PM

If you guys looked at my profile the motor (i have it)and assembly of the car is no prob. the silver CER cobra was the last car i built when I was with cutting edge. It is in the last kit car mag.I have since left the company to go back into the solar ind. my old partners are hard at it. I am getting the itch for a cobra as of late. ah yes the reg. well i am not going to have to worry about it because it wont be gas powered (alky) Im a sprint car driver sooo I have drums of the stuff. spcn only on the reg. JIM RIDDELL

tcrist · #7 (**permalink**) 05-12-2006, 08:53 PM

If you or anyone is looking to purchase a Cobra, my dissasembled Classic Roadsters II is for sale. It is currently registered in California. It was taken apart to restore (every nut and bolt). I bought it about 1 1/2 years ago and have been working on it in my spare time. I do not have to much of that any more. The frame and suspension is put back together. I had the frame powder coated gloss black and the headers and side pipes heat coated silver. I have a 289 CI and A 302 HO hanging around that needs to be rebuilt. I have a T-5 tranny with a new shifter and a new Ford Mororsports bellhousing. I also have a new flywheel, and a new King Cobra clutch, pressure plate and throw-out bearing. Pro-shock coilovers and tubular upper and lower control arms. If anyone is interested I can e-mail pictures. I am asking $15,000.00 or B/O.

Thanks,Terry

800hp · #8 (**permalink**) 05-12-2006, 09:08 PM

Terry, you know cutting edge is in manteca don't you? and my shop is on moffit. JIM

tcrist · #9 (**permalink**) 05-13-2006, 08:09 AM

Yes I do know that Cutting edge is in Manteca. I have been in your shop in the industrial park. Is your new building done yet?

800hp · #10 (**permalink**) 05-17-2006, 06:06 PM

Thanks guys, Talked to David today 427 sc alum diff. brushed body,goodyears,and lots of other goodies with an twm efi.aluminum 511 ci with 14.5 to 1 on alky fe in it. This is going to rock!!!!! cant wait 6 weeks and it will be all mine. Jim

408 stroker · #11 (**permalink**) 05-30-2006, 01:02 PM

Interesting Jim Why arn't you buying a CER? Hows the solar buis? Must be keeping you busy. Havn't heard from you in a while. You need to stop by & have a cold one when you are in town! Chas