Club Cobra - Kirkham Engineering's New Gauges

Club Cobra (http://www.clubcobra.com/forums/)

- Kirkham Motorsports (http://www.clubcobra.com/forums/kirkham-motorsports/)

- - Kirkham Engineering's New Gauges (http://www.clubcobra.com/forums/kirkham-motorsports/74617-kirkham-engineerings-new-gauges.html)

We have had made several sets now for EFI applications and the typical Fuel PSI Gauge choosen for EFI is our 0-100 psi. dial. This is a no charge to substitute just let us know if your running EFI

Fuel Psi We do:
0-15 psi
0-30 psi
0-60 psi
0-100 psi

Turn Signals
add: $30

Sensors included:

Dimensions:
The 2-1/16 gauges:
case size accross the threads is 2.050 inches(Goes through the hole)
gauge size including the bezel is 2.250 inches

The 4 inch Speedo and Tach
case size accross the threads is 3.80 inches
gauge size including the bezel is 4.10 inches

Illumiination:
The gauges use E.L. Lighting. Electro-Iluminesent Panel Lighting the dial or gauge face is charged with electricity. We use LED lighted pointers in red or white your choice. I have attached some pics of the gauges lit. The numbers are very sharp and crisp and the led pointer at night looks really stunning. Capturing this with a camera is sometimes a challenge Flash/No flash etc.
Tom And I will photograph a set in a car tonight and I will post them

Logos
Logos are the property of those that own them. At this time we are not adding your manufactures logo. We currently are selling ALL of our gauges without the KK. (No charge to remove)

Gauges with the KK on them have a 65K upcharge:)
http://www.clubcobra.com/photopost/d.../IMG_08141.JPG[/IMG]

That does it I have to have these, without the 65K upcharge :) Very funny. I didn't want to go with the Smith gauges due to mechanicals vs electronic sensors. I have been looking for alternatives this is by far the best. Thank you for making these available to us non Kirkham owners.
One last question are the bezels and dial indicators removable so that I could customize the faces? Did I ask that right?

I think what you are asking is can I change the face dial or customize it ? Is the gauge in a sealed case that I cant get into?

You can have us customize your set.....The bezel screws on and off with ease...not the Crimped on bezels that alot of other manufactures have.

We are in the process of building a website that details much of this. You can call me direct to order (801) 678-8222

Deleted, duplicate post

Rick,

Do you have any examples of a fuel gauge? And would it work in place of the built in fuel gauge in the new speedometer, with the same sender?

Rick, I got my gauges today! Thanks a ton, and I'll post the progress of my install. The screw-on backs are a great thing; it should make installation a breeze!

David Hodgkins

I'll see if I can post a pic today

Rick, your number is not working, it says it was disconnected. . .

(801) 678-8222 just tested it works great:D

So, are these going to be on display at the open house? Gives me a better reason to attend.

I am looking for a Revolution Speedometer for a Kirkham.

Quote:

Originally Posted by Rick162 (Post 690008)

:) Im sure the engine Mike Lefevers is building for me will help

Its more than just hp :D