Shelby wheel spinner

leon · #1 (**permalink**) 04-02-2017, 11:57 AM

Thank You for any help or advice offered with this.
While on first road test I lost a wheel spinner for wheel.
The part it threads on to says Shelby.
Does anyone have have a extra one or a set that I could get?
It's not the type that hold wheel on.
I have a pic of what I need.
Thank You, Leon

1ntCobra · #2 (**permalink**) 04-03-2017, 03:01 AM

I would be a little more worried about the missing lug nut than the missing decorative part.

Ron61 · #3 (**permalink**) 04-03-2017, 04:00 AM

If you find one why don't you drill a very small hole in the wing of all of them and put a safety wire there? That would stop it from coming off and you losing it.

Ron

leon · #4 (**permalink**) 04-03-2017, 09:31 AM

Missing lug is for locks not installed yet wheel is torqued to spec but spinner was not
Thanks guys

bliss · #5 (**permalink**) 04-12-2017, 08:40 AM

The place to start - who makes the wheels?

TexasSnake · #6 (**permalink**) 04-12-2017, 09:29 AM

Judging from the picture you posted I think that your wheels are the VN427 product produced by American Racing under license by Shelby. I would give Bob Lacey a call at Vintage Wheel. They are located in San Diego and the sales department can be reached at 888-339-7572. They are not inexpensive but I do know that Vintage Wheel does sell a center retainer and knockoff spinner assembly for the VN 427 wheel. Good luck with your replacement search.