|
Need Connecticut Tire Changer
If anyone out there knows of a place where I can got a couple of tires changed on my Trigos without getting them abused please let me know. The closer to New Haven the better, but I'll travel.
Bob |
I deal with a family owned service station here in northeast Ct, called Kelly's Tire in Putnam Ct. I just had them mount tires on a new set of Trigos I bought as a spare set. They did a perfect job and mounted weights on the inside like I asked.
I also had them a few months ago take a blue dot spare of an original sunburst wheel for me. It wasn't easy but they managed to separate the two without damaging the tire. They might be farther than you would like to travel buy its just a suggestion. Jay |
I had mine done by Firestone on the Boston Post Rd. in Branford, CT. They did an excellent job mounting and balancing mine. I have been told that they are the best when it comes to custom rims. They also put the weights on the back where they can't be seen.
|
Hey Guys:
After the weights were put on the inside were you then able to re-spin and get the machine to read all zeroes? Bob |
Good question. I was more concerned at the time with the rims not being damaged. I don't remember if they were re-spun.
Jay |
same here.
|
The firestone in downtown bridgeport (John St) did my tire's & rims
|
Star Tire in West Haven on the Post Road (RT 1) has the most experience in large diameter wheels and tire mounting in all of CT IMHO. They have the rubber coated and teflon anti scratch insterts on their big machines. They are a Tire Rack authorized installer and drop off depot. Star has perhaps the largest stock of rims in CT, with perhaps over 300 rim types in stock.
They have mounted Bridgestone, SO3 Pole Positions on my SC400's SSR GT3's (18" & 19") without batting an eye. They know how to balance them too. They also do the work for most of the Chrysler places in the area as that is where Stevens sent my Crossfire's rims, come to find out. |
Hey Art:
I took 2 wheels over to Star last week. Not a wonderful experience. The guy balancing the wheels kept insisting that the weights should only go in the back of the wheel. If the weights are just going on the back why not just do a bubble balance? They also kept changing the settings on the machine during the procedure, which drove me crazy. Some woman at the front desk kept telling me I had front end problems on my car which was home in the garage. I doubt I would go back. The part that made me the nuttiest was the fact that they must have hundreds of chrome wheels in the place but do not stock chrome weights. All they had was a bunch of big ugly weights. I ended up buying a box of chrome weights over the internet. Bob |
Goodyear in Enfield off of Rte 190 near Bob's can do expensive wheels and mags without out causing blemishes and nicks. Mike
|
Bob:
Quick thought... since ERA has many many tires mounted and balanced on their rollers and completed kits... perhaps a call to ERA would reveal who they use in Bristol (since pretty much all of the wheels they do are the pin drive variety). I know for a fact they do not do the mounting and balancing themselves. As for the chromed flat wheel weights... you should probably bring them if you want them. You can also ask Bob Putnam in the ERA forum here the same question. |
Bob, in case you are still looking, but not close to New Haven:
Maple Tire Center 63 Windsor Ave Route 83 Vernon CT 06066 860-872-6198 Best to call in advance and make an appointment. Two man shop, they personally do the mounting, balancing etc. I have used them for a number of years, the last time mounting the forged Fikse wheels on the Corvette http://www.fikse.com/fm10.html |
| All times are GMT -7. The time now is 02:55 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: