|
Sonoma brunch
Are any of you Sacramento area guys going to the brunch with the North Bay group this Sunday?
Maurice |
Hi Maurice,
Had not heard about it. I'm putting a new steering rack in my car, so most likely I won't make it. |
Hi Maurice,
Well, I hadn't planned on it, but it wouldn't take much to convince me if we took a nice scenic (eg: twisty) route. Are you going ? Ted |
Hi Phil,
Good to see you back in town. Bob said they will park in the square and have lunch at a local establishment. I would offer my skills with your rack, but I know you only want to do it once. Maurice |
Hi Ted,
I remember a few years back that we took 80 to the winters turn off and drove around Lake Berryesa ? and then on into Sonoma. The ride is pretty nice except the usual 80 traffic. I would like to go, especially if another Cobra or 2 comes along. Bob, from the North Bay Group did ask for a pm for a head count for the restaurant. Let me know Maurice |
Quote:
Ted |
Quote:
Hi Maurice, Take 80 to 113N, turn left on Russell Blvd, West, head straight out. it turns in to 128. Pretty cool ride, recently did that ride again on the bikes. Forgot how nice it was. Wish I could go Sunday, Sonoma Square is nice. Have fun. |
Ted,
How about meeting at the last gas station, Standard I think, before the causeway in West Sac. at 8 to 8:15 am. Looking forward to seeing you again. Maurice |
Hi Duane,
I will miss trying to keep up with that blue beauty of yours. Maurice |
Maurice,
The steering rack removal and installation is almost complete. Depending how the alignment goes I "may" be able to meet up with you guys on Sunday. Sonoma is a fun drive! |
That would be great, my friend.
Maurice |
Quote:
I know exactly where you're talking about. Have used that location as a meeting point for many motorcycle rides. See you there Sunday. Thanks, Ted |
Quote:
Hope you get it dialed in. It would be great if you could join us. Ted |
Get er done Phil
|
Well, the good news is I got the rack installed, toe in set, and she goes down the road straight. The bad news is I'm running on 7-cyclinders. I was idling along and all of a sudden she started missing. Limped home and isolated it to #6 being the culprit. It's too hot to do anything with right now, so after she cools down I'll check the plug and wire. No noise so I don't think it is a valve..... just have to wait and see. Damn it!!! :mad:
|
The wire is good and the plug is good - I'm stumped.
|
Phil,
How do you know #6 is bad? i.e. pulling the wire on #6 while its running or did you do a compression check on #6? |
Pulled the wire.
|
Quote:
How does the #6 plug look in comparison to other cylinders, color of the insulator etc? |
Quote:
|
| All times are GMT -7. The time now is 11:17 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: