|
looking for performance parts for 460
after further inspection it looks like an ill designed pan was the cause of my oil starvation problems. flattened the cam & sent junk running throughout the motor. the crank is repairable, the cam bearings ok & the rods just fine.
i am looking for some suggestions as to who makes good pans for the application or to buy one some one has with windage tray, baffles, crank scraper. also looking for used or new alum heads or ported & polished iron heads. want to increase compression, pistons are flat tops with valve cut outs & come within 1/16 " of deck at TDC. have crane roller rocker & guide plate with screw in studes. will be replacing springs. a high volume water pump would be nice also if you have any of these available for sale contact me. james |
I have a brand new 550HP, 460 crate motor if you are interested.
|
Milodon makes a very good pan for the Lima motors. Good pricing, too.
Sorry that I don't have many parts left. All I have is a set of the heavy cast iron police interceptor heads--1970's, I think. You'd be better off getting a set of aluminum heads. |
I would sure suggest you replace the cam bearings just to be sure no metal impregnated in the old brgs. Easy to spend YOUR money but this is cheap insurance to be sure.
|
Aviad oil pan...
|
Blue Thunder
I run Blue Thunder Super Cobra Jet Alum Heads on my 429 and LOVE them. Crisp crackle at idle and full NASCAR with your foot in em, and lots of go go. Not cheap not too expensive ~$800.00 bare naked. I run 10.5:1 compression ratio pistons, alum roller rockers, mid-range cam. I can still run unaltered pump gas.
http://www.bluethunderauto.com/ |
| All times are GMT -7. The time now is 11:04 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: