|
hood rivets
Can someone provide the layout/spacing/location/pattern for the hood rivets on the front edge of the hood on the SC cars as well as the rivet pettern/spacing for the hood scoop?
Also, what size was the hood scoop (lip width)? Thanks |
I have it. I have tried to attach but for some reason, the file will not load. PM me your email and I will send it to you.
Paul |
Here's a photo of an original CSX 3??? car. There appears to be 25 front surface rivets. However, I've heard that the spacind and number of rivets sometimes varied. You should be able to scale the spacing to get close enough.
Bob http://www.csxinfo.net/web/modules/x...de1ed8138e134a |
ERA is pretty good on accuracy and their manual has the first two rivets (front-center of the hood) 2" from the center line on each side. The next four rivets on each side are placed 3 inches apart. The last four rivets (each side are placed 5" apart. All rivets are placed 2" from the hood's edge on ERA's. The reality is that the rivets on comp. cars were placed in the center of the hood's support tube. That can vary a bit from car to car. Any deviation from dead center would tend to put a dimple in the hood as the rivet was drawn down. Pictures I have of Lemans 289s have the side rivets placed roughly 2" from the edge but the front rivets are probably no more than an inch and a quarter from the edge.
|
Check out the ERA website. They have the assembly manuals online and available for free download. The dimensions for the hood rivets are detailed on a drawing. Lots of good info in this manual.
Bill |
I think I hear Evan salivating in preparation for a response to this thread. ;)
|
:LOL::LOL::LOL: had me laughing out loud
i'm getting to enjoy this site. |
dlotz
My friend used to own CSX3020, I have exact drawing of spacing. Mind you the car was restored by McKluskey so it should be a good representation. Drop me an email for the jpg.:) |
how wide is the hood scoop lip?
Thanks for the help on the rivet layout guys.
Now I need to know how wide is the lip on the hood scoop supposed to be on the SC cars? The flat part that rivets to the hood. Thanks |
| All times are GMT -7. The time now is 07:13 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: