Fluted rotary wiper knob - park facility

[westcott cobra]

A Rover P6 Wiper switch has the same turn-on design as the original Cobra switch, two speed function, a push function for washers and in some cases a intermittent position. I bought some via ebaymotors.co.uk.

They are availlable from time to time...

For the fluted knobs i bought blank knobs from the UK and gave them away for engraving. See here:
http://www.clubcobra.com/forums/atta...5&d=1235125750

Westcott

[Gonch]

Originally Posted by westcott cobra

A Rover P6 Wiper switch has the same turn-on design as the original Cobra switch, two speed function, a push function for washers and in some cases a intermittent position. I bought some via ebaymotors.co.uk.

They are availlable from time to time...

For the fluted knobs i bought blank knobs from the UK and gave them away for engraving. See here:
http://www.clubcobra.com/forums/atta...5&d=1235125750

Westcott

Hi Westcott,
Ive got myself a P6 wiper switch and wondered if you could help with the wiring. Ive put a multimeter across the terminals and come up with the following...

switching in a clockwise direction
POSITION FUNCTION TERMINALS
1 Intermittent ??? 3 + 5
2 OFF 4 + 5 + 6
3 SLOW 1 + 3 + 4
4 FAST 2 + 3

Would this work like this???
TERMINAL FUNCTION
1 SLOW
2 FAST
3 LIVE
4 EARTH
5 DELAY
6 PARK

I doubt my terminal interpretation is correct as I've sen other switches that have some pins always connected. Any clue you could give would be much appreciated.

Cheers

Fraz

[westcott cobra]

Long time no answer,

i'm in the middle of part collecting for my FE rebuilt, sorry...

The wiper motor i used is the same as shown on this page from Anthony Staffords shop:
http://www.s-v-c.co.uk/prod_wipers.html

Scroll down the page and find some helpfull infos and layouts

For the positions of the switch i will check it until monday next week.

Westcott