Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Originality Forum (http://www.clubcobra.com/forums/originality-forum/)
-   -   Smiths Gauges and comp dash layout (http://www.clubcobra.com/forums/originality-forum/132159-smiths-gauges-comp-dash-layout.html)

achi 01-11-2015 07:32 PM
Smiths Gauges and comp dash layout
 
Hi,

I ordered my set of gauges and have a question regarding the oil pressure gauge. The options available are the 100 psi and 160 psi gauges. I've decided to go with mechanical gauges.

I am using a 390FE to power my FFR. It will be a mild build to about 400 hp.

I have seen some CSX cars and photos, and both gauges have been used..

What psi would you recommend and why?

I have searched this forum and did not find any info on the psi this engine should have nor the psi of the gauge.

I would also appreciate it if someone has the measurements to layout the gauges in a comp layout.

Thanks in advance for your help.

Cheers,
Achi

Jake the Snake 01-11-2015 07:46 PM
0-100 is big enough. engine oil presure is around 50 to70lbs. Rule of tumb is 10lbs of presure for every1000 RPM of engine rev.

mrmustang 01-11-2015 07:50 PM
http://www.clubcobra.com/forums/shop...imensions.html


On the FFR, I suggest taking the measurements off your steering shaft opening and adjust the attached measurements from there.


Bill S.



Quote:
Originally Posted by achi (Post 1334479)
Hi,

I ordered my set of gauges and have a question regarding the oil pressure gauge. The options available are the 100 psi and 160 psi gauges. I've decided to go with mechanical gauges.

I am using a 390FE to power my FFR. It will be a mild build to about 400 hp.

I have seen some CSX cars and photos, and both gauges have been used..

What psi would you recommend and why?

I have searched this forum and did not find any info on the psi this engine should have nor the psi of the gauge.

I would also appreciate it if someone has the measurements to layout the gauges in a comp layout.

Thanks in advance for your help.

Cheers,
Achi


All times are GMT -7. The time now is 11:32 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: