Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Originality Forum (http://www.clubcobra.com/forums/originality-forum/)
-   -   Flip Top Wheelbase? (http://www.clubcobra.com/forums/originality-forum/87054-flip-top-wheelbase.html)

Excaliber 06-10-2008 02:39 PM

Hmmm, longer WHEEL BASE or stretched front or rear of the suspension to accomodate a longer body? I'm not assuming the Flip Top chassis was lengthened or shortened afterward. Just wondering how the chassis in question might have been 'lengthened' in the first place.

Footnote:
Shelby never did want to deal with the 255 cid project, it was pushed on him by Ford, like the GT40 was as well. His thinking was the engine was to unreliable and complex to deal with.

Jac Mac 06-10-2008 02:46 PM

1 Attachment(s)
This is the pic that probably creates more questions than it answers!

Maricopa 06-10-2008 02:49 PM

Why? Looks like the standard WB to me judging by where everything sits. It's pretty easy for pictures to make things looked longer or shorter but the position of the pipes, doors, etc. all look right.

Jac Mac 06-10-2008 03:38 PM

Quote:

Originally Posted by Maricopa (Post 850675)
Why? Looks like the standard WB to me judging by where everything sits. It's pretty easy for pictures to make things looked longer or shorter but the position of the pipes, doors, etc. all look right.

I agree that it looks like a 90" WB, but Front wheel doesnt appear to be centered in wheel arch which would suggest body is intended for longer WB?
Not trying to start a war here, but other pics I have in books etc from Nassau meeting show the wheel more centered in arch which is why I asked for info at start of thread. Now its possible that this car may have been rebuilt/ restored at some stage and reverted to 90", in which case its unlikely that the issue will ever be resolved. For my part I will make my car with 93" simply because its already in that region.:)

Maricopa 06-10-2008 04:08 PM

I think the wheel is just turned a little to the left.

mr bruce 06-10-2008 04:46 PM

Very simple, contact Cal Metal, or Bobby B down in Texas, they will call Rich and ask him to measure it for you


All times are GMT -7. The time now is 10:56 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: