Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Parts Wanted (http://www.clubcobra.com/forums/parts-wanted/)
-   -   Cobras with Roundels (http://www.clubcobra.com/forums/parts-wanted/44588-cobras-roundels.html)

Jerry F 08-21-2003 01:55 PM

Cobras with Roundels
 
I plan on getting a new SPF car and would like to order it with roundels. I don't plan on racing the car, I just like the way they look. However, I notice that there are very few Cobras with roundels. Is it because you guys don't like them or are there other reasons? I know the old saying of buying what you like and not caring what other people think but I hate to order a car that other people don't find appealing. Any opinions you could give me would be appreciated.

sambrozy 08-21-2003 02:03 PM

If you like it do it. I personally like the Roundels. I sometimes drive with the vinyl roundels on the sidef my car. I first did the roundels so as to make my car different. But as you can guess at our next meeting someone else had done the same..

Stan

BLACKJACK 08-21-2003 02:12 PM

HI, JERRY,

YOU MIGHT WANT TO CONSIDER THE "VINYL CLING" TYPE OF ROUNDEL (MEATBALL). I "KNOW" THAT THEY WILL STAY ON AT LEAST UP TO 135 MPH. IT'S THE BEST OF BOTH WORDS - PUT 'EM ON WHEN YOU WANT THEM - TAKE 'EM OFF WHEN YOU DON'T.

YOU CAN ORDER THESE WITH ANY NUMBER YOU WANT - OR WITH NO NUMBER - FROM ENZO AT FINISHLINE.

Y'ALL HAVE A REALLY GREAT DAY,

BLACKJACK

Randy Rosenberg 08-21-2003 02:46 PM

Jerry,

I wanted the meatballs painted on the hood and trunck of my SPF, but the change order to have them painted didn't get to the factor in time. I was disappointed, but... life goes on.

Static cling work great on the sides, but one can never really get that "painted meatball" affect on the hood/trunck with static cling.

Good luck,
Randy R...

BLACKJACK 08-21-2003 03:35 PM

HI, RANDY,

SEVERAL OF THE GUYS IN THE CAPITAL AREA COBRA CLUB HAVE THE ROUNDELS ON THE HOOD AND THE TRUNK. TWO OF THEM I DON'T BELIEVE EVER TAKE THEM OFF. THEY LOOK SO GOOD THAT I THOUGHT THEY WERE PAINTED ON UNTIL THE OWNERS TOLD ME OTHERWISE.

I THINK A LOT HAS TO DO WITH THE APPLICATION TECHNIQUE AND HOW CAREFULLY THEY ARE STORED BETWEEN USES.

Y'ALL HAVE A REALLY GREAT DAY,

BLACKJACK

Roscoe 08-21-2003 03:44 PM

The following companies sell Rondelles (Meatballs)

Finish Line: http://www.cobraaccessories.com/home.htm
Squier Design: http://www.squierdesign.com
Operations Plus: http://www.cobracountry.com/opsplus/
Pegasus Auto Racing: http://www.pegasusautoracing.com

I like the Squier because you can choose the size, font, color and trim ring. Plus they will make anything else you want.

Roscoe

Randy Rosenberg 08-21-2003 03:58 PM

I agree that application and storage are key to static cling...

What I was referring to were the meatballs on the hood and trunk, where one typically lays a solid white meatball on top of the double stripes. Doing so doesn't show any break in the white stripes. This is kinda hard to describe in writing, so look at the blue/white cobra in the "Club Cobra" logo at the top left corner of this page. See how the stripes on the hood have a break that separates the meatball? That's the affect that is very hard to get from static cling meatballs... Make sense? Hope so...

Regards,
Randy R...

BLACKJACK 08-21-2003 04:23 PM

OK, RANDY - - -

NOW I KNOW WHAT YOU MEAN. THE COBRA THAT I HAD THE MEATBALLS ON WAS SOLID BLACK - - NO STRIPES.

AS I RECALL, I'VE SEEN THE COBRAS WITH THE STRIPES AND THE STATIC CLING MEATBALLS AND IT DIDN'T LOOK BAD AT ALL.

OF COURSE - - A LITTLE BIT OF ELECTRICIANS 1/2" VINYL TAPE IN A CLOSE COLOR, JUDICIOUSLY APPLIED MIGHT SOLVE THE PROBLEM ALSO.

SOME OF THE MANUFACTURERS PRODUCE THE RONDELLES WITH A BORDER OR MARGIN STRIPE IN A COLOR OF YOUR CHOICE.

ROSCOE - - YOU ARE TRULY AN EXCEPTIONAL RESOURCE. THANKS.

Y'ALL HAVE AREALLY GREAT DAY,

BLACKJACK

Randy Rosenberg 08-21-2003 04:56 PM

BTW, I bot my meatballs from Bob Shaw at Operations Plus. Great guy to do business with!!!

Roscoe 08-21-2003 04:57 PM

Here is the rondelle from Squiers with the trim ring:

http://www.priveye.com/dls/meatball1.jpg

Jerry F 08-21-2003 05:03 PM

Roscoe- Did I just see your car at Bear Mountain?

Roscoe 08-21-2003 08:04 PM

You mean there's another like mine? Sure I was up there parked with all those FFR's in the second row.

http://www.priveye.com/sounds/spicy_meatball.wav

Roscoe


All times are GMT -7. The time now is 04:27 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: