6 Pin PCD original wheels

[Dominik]

Good day!

I am making hubs and aim to use the original 6-pin wheels - in front only, don't ask... ;-)
Who can tell me what the PCD and stud diameter is? And the backspacing of the 7.5" wheel?

6 x 4.25" and drive pin diameter ½"?

ERA and Contemporary use the same, I believe (and Mk 4).

[Brooklyn-427]

If you want the old school magnesium look at a fraction of the cost we have the following. (Also available in 5 pin) 2 x 15 x 7.5 2 x 15 x 9.5 pin circle 6 on 4.25 to suit 1/2 inch pins.

[Dominik]

I could be interested, if shipping costs to South Africa won't kill the deal.

I have US Ford PCD 4.5" in the rear and go for the Street 427 look. Means I do consider narrow wheels in the back. Halibrand design, or Sunburst.

But let me ask my local supplier for prices that we don't get overboard here :-)
I have to use local centent as much as possible to avoid shipping costs.

I don't even know if Wheelcraft WAW is still making wheels in Pretoria.

[Brooklyn-427]

Sorry I just cut and pasted that information for you. I'm not a vendor of wheels.

[Dominik]

I see, no worries. But you found the PCD info I was looking for!