Club Cobra
Page 1 of 2 1 2
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   Scratch Builders Forum (http://www.clubcobra.com/forums/scratch-builders-forum/)
-   -   Mr Bruce Cobras (http://www.clubcobra.com/forums/scratch-builders-forum/136649-mr-bruce-cobras.html)

Mark Jackson 06-03-2016 04:10 PM
Mr Bruce Cobras
 
Has anyone finished one of these cars? Curious as I am building mine...

LMH 06-03-2016 07:02 PM
Doesn't Bruce just cast fiberglass bodies?
Larry

dallas_ 06-03-2016 07:39 PM
Bill D is doing one. Getting closer, but not finished yet.

http://www.clubcobra.com/forums/cobr...fia-build.html

Bill D 06-03-2016 09:51 PM
John Olsen finished a slabside

xb-60 06-04-2016 12:19 AM
My FIA body came from Bruce. It's been modified a little for a number of reasons....however I'm told that the shape as delivered from Bruce measured up well.

Cheers,
Glen

Jac Mac 06-04-2016 01:26 AM
Quote:
Originally Posted by Bill D (Post 1393604)
John Olsen finished a slabside
If your refering to John Ohlsen the Kiwi ex Shelby employee Bill, he built two FIA type cobras plus a Daytona. I think both FIA cars are now in Auckland NZ, one of which spends some time on classic race track meets.

BJ's Snake 06-04-2016 02:09 AM
You got that right
 
Quote:
Originally Posted by xb-60 (Post 1393610)
My FIA body came from Bruce. It's been modified a little for a number of reasons....however I'm told that the shape as delivered from Bruce measured up well.

Cheers,
Glen
Can't help but agree with you Glen..;)

Cheers

jolsen42 06-04-2016 05:09 AM
Quote:
Originally Posted by Jac Mac (Post 1393613)
If your refering to John Ohlsen the Kiwi ex Shelby employee Bill, he built two FIA type cobras plus a Daytona. I think both FIA cars are now in Auckland NZ, one of which spends some time on classic race track meets.
Nah, that's not the right OLsen :D. Plus he spells his name wrong.:LOL:

Here is my Mr. Bruce slabside. Bruce makes a beautiful and quality body. Remember you only get the body. I used a Factory Five chassis. Everything else you have to fabricate.

http://img.photobucket.com/albums/v6...psb56d2ff5.jpg

http://img.photobucket.com/albums/v6...ps98196e81.jpg

http://img.photobucket.com/albums/v6...ps620eb61f.jpg

Go view Bill D's build log and see a step by step building of a Mr Bruce FIA. http://www.clubcobra.com/forums/cobr...fia-build.html

Bill's build is a lot more difficult than mine, but then Bill is a lot more talented than me.

John O

dallas_ 06-04-2016 07:06 AM
Damn, that's a fine looking automobile.

John I can't believe I didn't think of yours when I saw the original post. Probably my favorite FFR of all time.

moore_rb 06-04-2016 07:47 AM
Quote:
Originally Posted by jolsen42 (Post 1393621)

Here is my Mr. Bruce slabside. Bruce makes a beautiful and quality body. Remember you only get the body. I used a Factory Five chassis. Everything else you have to fabricate.

http://img.photobucket.com/albums/v6...psb56d2ff5.jpg



I love that car...And I recognized your HSSSS plate from a picture I saw on the Factory Five forum a while back- I'm assuming this the same car, with the Original FF body on it?

http://img.photobucket.com/albums/v6...2/Cobra034.jpg

spl310 05-05-2017 03:51 PM
Is Mr. Bruce still making 289 bodies?

Ivygreen65 05-05-2017 07:33 PM
Yes, he is.

Buzz 05-05-2017 07:49 PM
oops - login issues

crendonman427sc 05-29-2018 12:26 PM
How can I contact Mr Bruce?

I have tried to PM him but its not working.

Any ideas

Thanks

twobjshelbys 05-29-2018 12:58 PM
Wrong place

Tommy 05-29-2018 12:58 PM
Quote:
Originally Posted by crendonman427sc (Post 1445260)
How can I contact Mr Bruce?

I have tried to PM him but its not working.

Any ideas

Thanks
I sent you a PM with info.

jmimac351 05-29-2018 04:33 PM
I hope to have a project down here in Florida August / late summer. Right around the time I sent the project to him I caught a real bad track time infection and kept telling him to work other other stuff. Making a hole for it now.

Me: "I can put the Miata behind the fence next to the trailer, nobody will see it."

Wife (Saint): :rolleyes:

**)

crendonman427sc 05-30-2018 02:48 PM
Quote:
Originally Posted by Tommy (Post 1445267)
I sent you a PM with info.
Thanks Tommy, your a star!

CHANMADD 06-11-2018 09:39 PM
Quote:
Originally Posted by crendonman427sc (Post 1445318)
Thanks Tommy, your a star!
Could you send me his info too..?

Tommy 06-12-2018 03:40 AM
Quote:
Originally Posted by CHANMADD (Post 1446159)
Could you send me his info too..?
Done.


All times are GMT -7. The time now is 03:55 PM.
Page 1 of 2 1 2
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: