|
Bob
How many times are you going to lose his number?:LOL:
|
I had his e-mail but never got around to getting his phone number. I know, my bad!!!!:)
Now that I am almost ready for some parts from him, I guess I'll need it?????? :):):):):):) Still trying to figure out these darned door hinges! AAAAARRRRRRGGGGGGHHHHHHHHHH!!!!!!!!!!! |
OK check your kitchen cupboards. We need saucepan lids in stainless steel. We'll be cutting a 5.5" circle out of them. We want a dished shape with flat tops that are 1" higher than the 5.5" with a 3" flat we can cut a 2" hole into. If you're confused by my explanation see the tank drawing in my gallery and check the sender recess. Karl and I will keep quiet if one of mothers lids goes missing!!!
|
Mine is already cut out for the sender and the pickup is part of the tank already also. I just mounted the tank low enough to clear the frame members enough for the sending unit and pick up tube to fit with about 3/4" clearance. I'm still above the level of the bottom of the frame rails by a bit.
However, if you need a stainless lid, the best place to find that stuff without risking your marital bliss is Goodwill or Salvation Army. Garage sales are good also. Good luck on your scavenger hunt. |
I got some! First yard sale I stopped at they had a stack of them. How many do I need lads?
|
I'm not sure, are you going into the tank production business, or building new age art sculptures? :):)
|
stainless lids
Hey Nick, Are these the normal saucepan lids that everyone has at a yard sale and cost approx. .50 cents each?
Or are these the special lids that are identical to the others but have "cobra" stamped in them and they cost 50.00 each? I'll take (1) one please. thanks, Karl |
These are actually the small stainless dishes like you'd use with a magnet on the back for a hardware tray while wrenching. They might be ashtrays or something but they are perfect for what we are doing. I'm thinking of laser etching them with Made in England, soldering them together and gauranteeing their originality as proved by the leaks.........LOL
|
| All times are GMT -7. The time now is 04:14 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: