12-09-2015, 05:07 AM
|
 |
CC Member
|
|
|
Join Date: Jun 2000
Location: Cape Town, South Africa/Mainz, Germany,
Posts: 1,600
|
|
Not Ranked
Drawings
Welcome 120mm!
I built a handful of chassis based on the Cobra Restorers drawings. They are actually not that bad. I did improve on a few measurements, based on a CSX 4000 chassis which I measured here in South Africa. I can't recall the changes because I built the last one years ago. The scuttle hoop is critical.
Mickmate build a usable chassis from CR prints and might be able to assist.
There are plenty of modern adaptions around, and it's a matter of preference I suppose.
I drew up a chassis from a SA built version, done by a local race car builder, whose car handled extremely well. I managed the same lap times with a 302 and 290hp as the local 300+ hp 911s.
What I mean is, plenty of chassis that behave 90% well if the suspension is thought through nicely. The other 10% I leave to the professionals :-)
__________________
If I don't respond anymore, that's because I can't log in
|
4Likes
Threaded Mode
