windshield arc measurement

cruzer5531 · #1 (**permalink**) 07-13-2006, 01:26 PM

Anyone have the windshield dimention from lower corner to lower corner and the measurement from the center of that line to the center bottom of the windshield? (center arc). I would like to check if there has been any sag in the body berfore I make the dash hoop.
Thanks, Vic

mickmate · #2 (**permalink**) 07-13-2006, 08:45 PM

I took a measurement from the top of my cowl to the corners that come back to the doors. It is 3 3/4" high on that arc on mine.

cruzer5531 · #3 (**permalink**) 07-14-2006, 01:03 PM

Mickmate,
Thanks for the help. looks like I have a little sag that can be fixed with the hoop.
Thanks, vic

Johnson · #4 (**permalink**) 07-20-2006, 09:56 AM

Maybe we can clarify this, is that 3 3/4" measuerd as if you laid a streight edge across the botom of the dash and then measured streight up? Or a streight edge from edge to edge on the windshield and measure to the center?

mickmate · #5 (**permalink**) 07-20-2006, 03:51 PM

Straight edge acroos the cowl measured down to the corners each side evenly. The arc of the cowl is 3.75" high door point to point to screen.