|
Pedal Box
Are there any drawings, measurements, or ???? out there for the original pedal box. Time to start fabing one.
Thanks dave |
Hi Dave, I'll send you an e-mail. Let me know if you find out any more.
Cheers Nick |
pedal box
I can make a drawing up off of my frame if you like. I have an original style 427 frame from the Hi Tech jig (Tim Gunning).
Scott |
I like, I like. That would be great, I have the front master layout if you want me to send that to you.
|
I have at least one of everything out of a pedal box if you still need help let me know. You can email me directly @ mknos@att.net or call @ 602-400-7725.
|
The pedal box will have to be modified (i think) because I am just using a brake pedal with two Wilwood cylinders (hipo manual shift C4). Trying to get (build) a stock looking box.
Dave |
No problem making a drawing of the box..... I have a pdf prepared already that has the front layout for the thru tube and brake and clutch cylinders. Is this what you are looking for or?
Scott |
That's what we're after. It would be great if you could put it in your gallery or e-mail it to Dave or myself.
|
Hi Scott,
One fellow member sent me a front panel layout( inside front view). Pretty nice. But I am wondering if there is a SIDE view layout showing length? Thanks for your time. Dave |
Dave, get your e-mail cleaned up I'm trying to send you some good pictures!
|
|
hi guys,
I someone would just quickly install a PC partiion on my mac, I could identify the relevant drawiing and send it... the positions for the master cylinders must be quite accurate that the guiding sleeve for the actuating rod also fits - if you use it... if you really get desperate, I drive to get the hardcopies and fax them. dominik |
Hi Dom, we're scratch builders nothing happens quickly enough! Dave I'll resend tonight.
|
Pedal box
Ok guys, you have my interest...just post a drawing and lets see what ya got
Al |
box
alfy65,
After months of consultation between us scratch builders we have come up this detailed drawing that should help. Please call for help anytime. :):):) http://www.clubcobra.com/photopost/data/500/pedals1.jpg Just kidding.:LOL: One or two drawings that I have are copyrighted, so I'm not sure of the legality of putting these on the site. Will PM you later. Dave elgecko |
|
pedal box
g'day!
there is a bit of progress: after some "scratching" I found the drawing. but they are too big (A3) for the fax machine, so I either have to reduce them in the copy shop or cut them in pieces... Or check my files on someones PC, because my new mac is not partitioned for PC yet. domink |
Pedal box
If you want to take the easy way out, Tim Gunning has a complete box (less the pedals and balance bar) for sale for $90. He also has the pedals, balance bar, push rods, etc for the box. You can reach Tim at:
bestof65@azci.net Scott |
Since when do scratch builders take the easy way out :LOL:
I've used Tim before , probably will again. Dave |
The only area that they seem to take the easy way out is under the hood. A real scratch builder would probably want to cast his own block, forge the pistons, rods, and crankshaft... just kidding. The work that is done on this site is very professional, in many cases better than the orginal car!
|
| All times are GMT -7. The time now is 08:30 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: