brake and fuel lines

rwall49 · #1 (**permalink**) 11-13-2006, 06:57 PM

Can anyone tell me what they used to connect and separate the brake and fuel lines as they run along the frame. I looked for a double clamp that keeps the two lines separated and also cushioned from the frame and reduces vibrationm but could not find this item. Help if you can.

Ron

wtm442 · #2 (**permalink**) 11-13-2006, 07:15 PM

Adell clamps are good. I've used them numerous times over the last 30 years or so on many vehicles.

http://www.boatownerswarehouse.com/b...fm/2,4921.html

vettestr · #3 (**permalink**) 11-13-2006, 08:11 PM

Every clamp and type known to man is here http://www.inlinetube.com/images/bra...lips/clips.htm but I like the rubber cushioned clamps at Jegs too http://www.jegs.com/webapp/wcs/store...10002_23473_-1 part # 361-171003

mickmate · #4 (**permalink**) 11-13-2006, 08:55 PM

What diameter lines? I've been giving away some nifty little widgets I have a heap of for two lines.

rwall49 · #5 (**permalink**) 11-14-2006, 08:04 AM

the size lines I think I will be using is 3/16 and 3/8.

ron

mickmate · #6 (**permalink**) 11-15-2006, 08:17 PM

The ones I have are for 3/8" lines. If you want some e-mail me some details. You could use a slit piece of rubber tube around the 3/16........

Dominik · #7 (**permalink**) 11-16-2006, 01:54 PM

I like the clamps used at the production line for GM or most others.
It's a screw on plastic block (to chassis) where the lines can be clipped into.
I haven't seen them for sale to the general public though!

Dom

rwall49 · #8 (**permalink**) 12-02-2006, 06:43 PM

Guys thanks for the info. I have found a link that might be interesting to some.
http://www.tperformance.com/
Look under brake fittings