 
Main Menu
|
|
Nevada Classics
|
|
Advertise at CC
|
| S |
M |
T |
W |
T |
F |
S |
| |
|
|
|
|
|
1 |
| 2 |
3 |
4 |
5 |
6 |
7 |
8 |
| 9 |
10 |
11 |
12 |
13 |
14 |
15 |
| 16 |
17 |
18 |
19 |
20 |
21 |
22 |
| 23 |
24 |
25 |
26 |
27 |
28 |
29 |
| 30 |
|
|
|
|
|
|
|
|
CC Advertisers
|
|
 4Likes
03-21-2008, 07:55 PM
|
 |
CC Member
|
|
|
Join Date: Feb 2006
Location: IGH, MN,
mn
Cobra Make, Engine: scratch build self design 4.6l DOHC
Posts: 769
|
|
Not Ranked
I can
you to select, copy, and paste the link at the bottom of the photo display page into your post. |
03-30-2008, 08:22 PM
|
 |
CC Member
|
|
|
Join Date: Mar 2007
Location: Alpena,
Mi
Cobra Make, Engine: Scratch building frame,FFR Mkll body ,302w, and T5 trans, 3.0 rear.
Posts: 416
|
|
Not Ranked
Thanks Patrick, I will try that for my next post. I have the cowl hoop tacked up and tack mounted onto the outriggers, modified the tie rod ends to get the toe in set, will order the proper parts for final assembly. will post pics in the next couple days. Will be going to the scrap yard in the morning to check out the T-bird rotors for fit, they are 10.5 in dia and the caliper brackets will allow standard parts to be used ( all Ford no GM stuff). Carl.
__________________
1963 Mercury Monterey 460+ .060 .//Cobra clone, Scratch build frame /302/ T-5 WC / 3.00-9in/FFR mkll body (Broken but repairable) /91 Lincoln Wire Wheels   //  : N.S.M.C Charter/Life Member// Die Hard Blue Oval Nut   
The finish is better than the beginning. Ecc7:8
|
04-02-2008, 07:04 PM
|
|
CC Member
|
|
|
Join Date: Mar 2007
Location: Alpena,
Mi
Cobra Make, Engine: Scratch building frame,FFR Mkll body ,302w, and T5 trans, 3.0 rear.
Posts: 416
|
|
Not Ranked
__________________
1963 Mercury Monterey 460+ .060 .//Cobra clone, Scratch build frame /302/ T-5 WC / 3.00-9in/FFR mkll body (Broken but repairable) /91 Lincoln Wire Wheels // : N.S.M.C Charter/Life Member// Die Hard Blue Oval Nut
The finish is better than the beginning. Ecc7:8
Last edited by 63mercury; 04-05-2008 at 04:24 AM..
|
06-05-2008, 07:51 PM
|
|
CC Member
|
|
|
Join Date: Mar 2007
Location: Alpena,
Mi
Cobra Make, Engine: Scratch building frame,FFR Mkll body ,302w, and T5 trans, 3.0 rear.
Posts: 416
|
|
Not Ranked
Picked up a 302 to rebuild, needs boring and maybe a stroker to make it 347.
Also picked up a T-5 now I must find the bellhousing and I can do a fitup before I rebuild the engine. The engine came with a set of 1966 heads which have 57cc chambers, this may be something I can work with. Just gathering parts and finishing the honey-do's till the white stuff flies again.
__________________
1963 Mercury Monterey 460+ .060 .//Cobra clone, Scratch build frame /302/ T-5 WC / 3.00-9in/FFR mkll body (Broken but repairable) /91 Lincoln Wire Wheels // : N.S.M.C Charter/Life Member// Die Hard Blue Oval Nut
The finish is better than the beginning. Ecc7:8
|
06-15-2008, 08:00 PM
|
|
CC Member
|
|
|
Join Date: Mar 2007
Location: Alpena,
Mi
Cobra Make, Engine: Scratch building frame,FFR Mkll body ,302w, and T5 trans, 3.0 rear.
Posts: 416
|
|
Not Ranked
Got a bell housing now I can start fitting stuff together and making motor mounts, life is good.
__________________
1963 Mercury Monterey 460+ .060 .//Cobra clone, Scratch build frame /302/ T-5 WC / 3.00-9in/FFR mkll body (Broken but repairable) /91 Lincoln Wire Wheels // : N.S.M.C Charter/Life Member// Die Hard Blue Oval Nut
The finish is better than the beginning. Ecc7:8
|
07-29-2008, 07:32 PM
|
|
CC Member
|
|
|
Join Date: Mar 2007
Location: Alpena,
Mi
Cobra Make, Engine: Scratch building frame,FFR Mkll body ,302w, and T5 trans, 3.0 rear.
Posts: 416
|
|
Not Ranked
I picked up another 302 today from a lincoln with less than 40,000 when wrecked and has been sitting for 20 years, cylinders are, were, full of oil in fact I drained over 2 gal out, have the intake off and its clean as new. I will be removing the heads to check the cylinders and do a port and valve job. I'm waiting for my intake from ebay. Now I need a 50 oz flywheel and the work begins.
__________________
1963 Mercury Monterey 460+ .060 .//Cobra clone, Scratch build frame /302/ T-5 WC / 3.00-9in/FFR mkll body (Broken but repairable) /91 Lincoln Wire Wheels // : N.S.M.C Charter/Life Member// Die Hard Blue Oval Nut
The finish is better than the beginning. Ecc7:8
|
07-30-2008, 06:20 AM
|
 |
CC Member
|
|
|
Join Date: Jun 1999
Location: Portsmouth,
OH
Cobra Make, Engine: Undecided, 289
Posts: 200
|
|
Not Ranked
Looks like you are making decent progress. Pardon me while I sit here and be envious!  Keep up the good work. |
| Thread Tools |
|
|
| Display Modes |
Rate This Thread |
 Hybrid Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 11:37 AM.
Links monetized by VigLink
|
