|
[quote=LMH;1287451]What lamp/button/thingy is this one? I don't recognize it.
Larry https://lh3.googleusercontent.com/at...=w1168-h875-no Larry I got the all the vent pulls & brake & Gen light from a 1961 Ford COE Firetruck. Mike |
I got you. You probably already know but the Alt lamp on the later Autolite cars was made specifically for Cobra's. It was similar to the Emergency Flasher lamp used in the truck but w/o the lettering around the bezel.
Larry |
Quote:
https://lh4.googleusercontent.com/-i...9vPCRBm_ph.jpg |
Nice! The emergency flasher lamp used on the truck is the same fixture with a different bezel. If I can find someone locally who can do metal spinning, I'm going to have a couple stainless bezels made up to fit the old flasher fixture.
Larry |
|
Very nice work!
Larry |
Like the dash light..............
Very cool;) |
Peace Brother!:LOL:
https://lh3.googleusercontent.com/tN...=w1280-h854-no |
|
Free?? I am jealous!
|
I recently finished my tank. Lots of work but worth it!
Larry |
Free is always great!
|
|
|
1 Attachment(s)
Found this one for my dash..............
|
Still chippin away finally got the RS door working right.https://lh6.googleusercontent.com/-R...0/SAM_7109.JPG
https://lh4.googleusercontent.com/-z...0/SAM_7113.JPG https://lh3.googleusercontent.com/-i...0/SAM_7115.JPG |
|
Back at the throttle casting again this is the best one yet the mold/sand needs a tweaking.
https://lh4.googleusercontent.com/-Y...0/SAM_7423.JPG https://lh5.googleusercontent.com/-e...0/SAM_7424.JPG https://lh5.googleusercontent.com/-b...0/SAM_7425.JPG https://lh6.googleusercontent.com/-j...0/SAM_7426.JPG |
Mouse malfunction...
|
Map I take it you are pouring yourself. What kind of sand are you using? Where are you pouring the metal in and where is it coming out of the mold . When you get them in the right place it makes a world of difference. Is the rest of the gas pedal a casting or fab out of steel? When the weather gets better I am going to make a pattern for the AC petal and pour some of them. I know I can buy them cheaper than casting myself....... but I like making things.
If I had a casting to copy I think I could make some good castings. Mark |
| All times are GMT -7. The time now is 01:27 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: