Club Cobra
Page 6 of 8 12345 6 78
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   Scratch Builders Forum (http://www.clubcobra.com/forums/scratch-builders-forum/)
-   -   Allied Slabside (http://www.clubcobra.com/forums/scratch-builders-forum/84223-allied-slabside.html)

map 12-24-2016 04:33 PM
Quote:
Originally Posted by 1795 (Post 1411938)
What size pipe did you use? I will be working on a 289 build in the coming months and will need to custom fabricate some pipes. Mine may be more under the car and exiting just prior to the rear wheels.
3" from the collector back I found a great deal on eBay on 3" J bends, the exit/turn down is at the rear wheel arch. Looking at the Speedway Auger style muffler. Dynatech® Auger Style Muffler, 11 x 3 Inch

I can't run the side pipes under the body like 2260 (pic) I built in 1 1/2" of drop into the chassis when I built it I won't have any ground clearance.

https://lh3.googleusercontent.com/ez...B=w499-h285-no

map 12-24-2016 04:38 PM
Quote:
Originally Posted by 1985 CCX (Post 1411941)
Sweet progress.
You gonna make SAAC42
I doubt it I just about made it to Beaver run 40 miles away.

map 01-01-2017 06:50 PM
Burp tank.

https://lh3.googleusercontent.com/dj...=w1280-h854-no

https://lh3.googleusercontent.com/b3...=w1280-h854-no

https://lh3.googleusercontent.com/vL...=w1280-h854-no

jolsen42 01-02-2017 08:15 AM
Well done! :D

John O

1985 CCX 01-02-2017 06:00 PM
You going to fabricate the alternator bracket or go to a current source?

map 01-03-2017 12:08 PM
Quote:
Originally Posted by 1985 CCX (Post 1412532)
You going to fabricate the alternator bracket or go to a current source?
It's done I want it low & tight shortest belt possible.

map 01-22-2017 11:38 AM
Still at it.

https://lh3.googleusercontent.com/8o...=w1280-h720-no

map 01-22-2017 11:44 AM
Quote:
Originally Posted by 1985 CCX (Post 1412532)
You going to fabricate the alternator bracket or go to a current source?
Thanks for noticing the Alt I screwed up I had it in the wrong place right in the support tube moved now. I made a bracket.

Mike

map 01-22-2017 05:04 PM
Moving along today I got all the Battery tray cut & bent But I can't remember what the battery hold down looks like any Pix?

https://lh3.googleusercontent.com/f1...=w1280-h854-no

https://lh3.googleusercontent.com/18...=w1280-h854-no

https://lh3.googleusercontent.com/5E...=w1280-h854-no

https://lh3.googleusercontent.com/fT...=w1280-h854-no

LMH 01-22-2017 07:15 PM
http://i21.photobucket.com/albums/b2...psvop7z06n.jpg

Larry

map 01-22-2017 08:31 PM
Quote:
Originally Posted by LMH (Post 1413801)
Thanks Larry make one tomorrow!

Mike

map 01-24-2017 01:34 PM
https://lh3.googleusercontent.com/Nc...=w1280-h854-no

map 01-31-2017 11:08 AM
Moving along.

https://lh3.googleusercontent.com/_1...=w1280-h854-no

https://lh3.googleusercontent.com/lO...=w1280-h854-no

https://lh3.googleusercontent.com/xB...=w1280-h854-no

https://lh3.googleusercontent.com/xz...=w1280-h854-no

1795 01-31-2017 11:47 AM
In my opinion, the sanding and glass work is the worst part :eek: Looks like you are doing a good job.

map 02-03-2017 09:33 AM
Quote:
Originally Posted by 1795 (Post 1414519)
In my opinion, the sanding and glass work is the worst part :eek: Looks like you are doing a good job.
Endless! :LOL:

map 02-03-2017 09:40 AM
https://lh3.googleusercontent.com/Ii...OmdADQ=s875-no

https://lh3.googleusercontent.com/qD...3qjm80=s875-no

https://lh3.googleusercontent.com/Un...o=w960-h540-no

https://lh3.googleusercontent.com/_D...=w1280-h854-no

https://lh3.googleusercontent.com/Hu...=w1280-h854-no

Bill D 02-03-2017 10:45 AM
Is the hood hoop steel or aluminum? And what size (OD and wall thickness)?

Thanks
Bill

map 02-03-2017 12:43 PM
Quote:
Originally Posted by Bill D (Post 1414754)
Is the hood hoop steel or aluminum? And what size (OD and wall thickness)?

Thanks
Bill
Bill it's the original 3/4" steel from CSX-2575.

Your Body was made in the mold from my car. :)

Mike

jolsen42 02-03-2017 12:51 PM
Quote:
Originally Posted by map (Post 1414764)

Your Body was made in the mold from my car. :)

Mike
As was mine.:LOL:

John O

map 02-03-2017 03:30 PM
Quote:
Originally Posted by jolsen42 (Post 1414765)
As was mine.:LOL:

John O
And it's a fantastic Cobra well done john!

So mine had babies.:LOL:

Mike


All times are GMT -7. The time now is 07:04 AM.
Page 6 of 8 12345 6 78
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: