Allied Slabside

[1795]

Lots of nice work going on there. You are really moving along. Gotta love those 289's. Did you custom fabricate the side pipes?

[jolsen42]

Originally Posted by 1795

Did you custom fabricate the side pipes?

Of course he did!

John O

[map]

I make just about everything I'm cheap..

The RS.
[IMG]

Originally Posted by 1795

Lots of nice work going on there. You are really moving along. Gotta love those 289's. Did you custom fabricate the side pipes?

[/IMG]

[1795]

What size pipe did you use? I will be working on a 289 build in the coming months and will need to custom fabricate some pipes. Mine may be more under the car and exiting just prior to the rear wheels.

[Mark IV]

Originally Posted by 1795

What size pipe did you use? I will be working on a 289 build in the coming months and will need to custom fabricate some pipes. Mine may be more under the car and exiting just prior to the rear wheels.

Jim,

A 289? Really, do tell!

[1795]

Patience Rick, patience

[map]

Originally Posted by 1795

What size pipe did you use? I will be working on a 289 build in the coming months and will need to custom fabricate some pipes. Mine may be more under the car and exiting just prior to the rear wheels.

3" from the collector back I found a great deal on eBay on 3" J bends, the exit/turn down is at the rear wheel arch. Looking at the Speedway Auger style muffler. Dynatech® Auger Style Muffler, 11 x 3 Inch

I can't run the side pipes under the body like 2260 (pic) I built in 1 1/2" of drop into the chassis when I built it I won't have any ground clearance.