Framedrawings

The Swede · #1 (**permalink**) 07-24-2008, 01:52 AM

How ca i get framedrawings so i can start up my cobra build .. is there someone here that knows where i can download cad drawings ?? i would be really greatful for some answers.. and exuse me for my bad english ... im from sweden

PANAVIA · #2 (**permalink**) 07-24-2008, 01:54 AM

this guy is in the Netherlands --

http://www.donostia.demon.nl/index.htm

Great site and has good drawings. he might be a good contact.

The Swede · #3 (**permalink**) 07-24-2008, 02:06 AM

Thx .. I was and looked at the page but there are not completed drawings and thats is what i want . but im still are going to look at hes page cos he had alot of good ideas .. and thx alot for your tip

PANAVIA · #4 (**permalink**) 07-24-2008, 02:25 AM

Cool. -- Best of luck, we are here to help.

--Steve

Three Peaks · #5 (**permalink**) 07-24-2008, 06:56 AM

Cobra Restorers sells a set of chassis drawings for around $200 last time I checked. They don't include the suspension pieces but just about everything on the chassis is there.
There are also resources on the forum to buy all the little bits, pieces, mounting tabs, etc.... that you will need. You will just need to ask when you get to that point.

Bob