- -
Front body damage
(
http://www.clubcobra.com/forums/shelby-american-inc/146735-front-body-damage.html)
| Dominik |
05-24-2023 07:40 AM |
Note, CSX 4750 to CSX 4760 were meant to be built in South Africa. Perhaps two up or down. Six of them actually left the country, sort of finished. And then onwards from some number similar to yours?
|
| Dominik |
05-24-2023 07:49 AM |
Seems I cannot attach (chassis) pics. I also see that you are from Vegas.
Weren't, after the SA factory closed down, them CSX 4000 cars built in Mexico and a prison in Vegas?
What I am saying is, there should be know how and possible parts nearby.
|
| Dominik |
05-24-2023 07:52 AM |
Quote:
Originally Posted by Maxjeep
(Post 1517480)
I’m making some progress. I’m trying to align my 3 new brackets with my good one. I have the right distances between 3 of the 4 but I have too much pressure on the last one. The 2 inner brackets are perfect with the other side. I’m thinking that I need to remove 1/8” on both outer brackets. The degree and angle of the inner brackets are a perfect match.
|
Should you not have the bigger holes (1.5" diameter) in the outer brackets, to receive the cup washer? |
| Maxjeep |
05-24-2023 08:10 AM |
Quote:
Originally Posted by Dominik
(Post 1517490)
Should you not have the bigger holes (1.5" diameter) in the outer brackets, to receive the cup washer?
|
The cups go in the inside brackets. I’m waiting for new cups. I turned down a couple of fender washers and drilled holes in them so I have a solid fit. I sandwiched them between 2 larger washers. I think it’s more accurate than using the cups. This made it easier to get the right distance between the brackets also. |
| Maxjeep |
05-24-2023 08:13 AM |
Quote:
Originally Posted by Dominik
(Post 1517489)
Seems I cannot attach (chassis) pics. I also see that you are from Vegas.
Weren't, after the SA factory closed down, them CSX 4000 cars built in Mexico and a prison in Vegas?
What I am saying is, there should be know how and possible parts nearby.
|
I confirmed with Tony at Shelby that my car was built in South Africa. Shelby doesn’t sell parts for their cars anymore and they have turned it over to Superformance… much to my surprise. |
| Dominik |
06-01-2023 12:02 AM |
Well, Superformance builds them here in SA. But it is a surprise that nobody in the US can help you with parts. Some cars and their bodies had been made in the US at HST (are they in Vegas?) before Superformance took over in SA.
I am surprised that there is no mold in the US left to make body parts. Granted, they scrap them after they are worn out. Or shipped back to SA.
What else do you need? Did you check with the scratch builders?
I just checked, yes my bad. Cup washers on inside at the lower, outside at upper. I built without them and sleeved to within 1/10 mm.
|
| All times are GMT -7. The time now is 02:02 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
