- -
9" Rear
(
http://www.clubcobra.com/forums/shell-valley-companies/56172-9-rear.html)
| Gman1013 |
07-30-2004 07:22 AM |
9" Rear
I have measured the 9" rear in my Shell Valley Cobra and it measures 52 1/2" end to end. I have the Pin Drive adapters for the Knock-off wheels with 295/15 BF Goodrich Radial T/A's. The tire stick out about 1 1/2 inches past the wheel well. I have taken the car to the shop to see about getting the rear narrowed but the problem is with the brackets for the rear calipers and the mounts for the rear control arms. There is very little space left to narrow the rear enough. My car is an older kit and the disc brake brakets seem as if they were made from some thick wide steel stock that was cut with a blow torch. Does Shell Valley sell the correct widthe rear with disc brakes/brackets I would need to fit my application? If so, what would the cost be for a complete rear with axles and all? Are my tires simply too wide? I am figuring that I would need to narrow my rear 3" or more.
Thanks for the help.
Greg
|
| Gman1013 |
07-30-2004 07:24 AM |
Would it be easier and less expensive to just get an 8.8 rear from a late 90's Ford Explorer with disc brakes and have that narrowed and necessary control arm brackets added??
|
| blykins |
07-30-2004 07:35 AM |
Hey Gman....you might wanna hookup with misfit41 on here....He too has a Shell Valley and is working on narrowing the rearend to get his Trigos to fit....I'm sure he could really give you some insight.
|
| Gman1013 |
07-30-2004 07:48 AM |
Thanks, I will try to contact him
|
| Shell Valley |
07-30-2004 09:32 AM |
Our 9" housings now meausre 50 1/2" (housing only, flange to flange) We've gone as narrow as 48 1/2" to help clear the Trigos. On an older car the trailing arms may be placed slightly different than today so that may be the limiting factor.
Dana
|
| Gman1013 |
04-05-2005 07:28 PM |
Dana,
Could you guys build me a 9" rear narrowed to 49" that would work in my Shell Valley? I have the small bearing ends with disc brakes from a 2000 explorer.
Greg
|
| All times are GMT -7. The time now is 04:35 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
