Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Shop Talk (http://www.clubcobra.com/forums/shop-talk/)
-   -   Cobra shifter handle (http://www.clubcobra.com/forums/shop-talk/106475-cobra-shifter-handle.html)

cobrarkc 08-31-2010 11:02 AM
Cobra shifter handle
 
Does anyone know where to get an original looking 427 style shifter handle that bolts up to a Hurst shifter on a toploader. I have only seen them for T-5, T-45, T-56 & TKO transmissions.

streetrod1927 08-31-2010 12:57 PM
shifter handle
 
Try Finish Line or Cobra Restorers or Branda in PA. You can get them with the operational reverse lock out as well. matching kobs are available.

Rick Parker 08-31-2010 01:09 PM
David Kee Toploaders, who is an advertiser on this forum. Look in the "Traansmissions" section Portal.

FIA-ERA 08-31-2010 02:14 PM
I second the David Kee Toploaders! He has all the right stuff WITH the knowledge to make it right too. I spent A LOT of hrs on mine and just should have gotten it all from David. I would have saved a crap load of time and in the end I only saved $45 dollars. He's the man! Not that the others don't have some of the same stuff, David just gets the run down on what you have and THEN will get you the right part. Good Luck!

cobrarkc 08-31-2010 02:17 PM
Quote:
Originally Posted by streetrod1927 (Post 1075155)
Try Finish Line or Cobra Restorers or Branda in PA. You can get them with the operational reverse lock out as well. matching kobs are available.
I am looking for one that the bolts are vertical to bolt up to the Hurst shifter with the non-functional reverse lever. Finish Line only sells for T-5 TKO.

cobrarkc 08-31-2010 02:19 PM
Quote:
Originally Posted by Rick Parker (Post 1075160)
David Kee Toploaders, who is an advertiser on this forum. Look in the "Traansmissions" section Portal.
I looked there I only saw complete shifters. I am looking for just a handle that will bolt up to my existing shifter like the ones that bolt up to the TKO's

rustyBob 08-31-2010 06:45 PM
try Hurst, they sell just the shift lever .

FIA-ERA 08-31-2010 07:12 PM
I see what your saying and I had the same problem. I used a Hurst Comp Plus shifter with the removable stick. I ended up making a bracket that let me use their stick for a "t-5" shifter and drilled out the holes in the shifter handle (stick) to make it work. I'll see if I have any pics of it. I wanted the "correct" shifter look and it works perfect except I don't have the reverse lock out. I'll see what I got. Thanks, Matt.

FIA-ERA 08-31-2010 07:17 PM
1 Attachment(s)
Lets see if this works. I had to actually move my shifter forward a little based off of what the tailshaft needed. Plus the shifter ended up to far back and NOT where it was supposed to be. Hope this gives some ideas. I made my own Heim jointed shifter too. I love it! NO SLOP! Very solid. PM with any questions.

jolsen42 08-31-2010 08:15 PM
Mustangs Unlimited has them. I believe this is what you're looking for. John O
http://www.mustangsunlimited.com/key...7210A&x=10&y=7

FIA-ERA 09-01-2010 05:23 AM
Do You need to adapter part that bolts to the Hurst shifter that would allow the use of a stock shifter handle, right? There's always a couple of ways to do things. I think a call to David will get you what you need. He's been doing this for quite sometime! Even if he doesn't have it on his website I bet he knows where or how to get it resolved. Matt

cobrarkc 09-01-2010 08:00 AM
Quote:
Originally Posted by FIA-ERA (Post 1075312)
Do You need to adapter part that bolts to the Hurst shifter that would allow the use of a stock shifter handle, right? There's always a couple of ways to do things. I think a call to David will get you what you need. He's been doing this for quite sometime! Even if he doesn't have it on his website I bet he knows where or how to get it resolved. Matt
Matt,
I'm really looking for a handle like yours only curved. Can you tell me if the holes on the handle line up with the hole on the shifter body? I don't care if they are the same size, I will be putting a bolt through it anyway like the original hurst unit.

cobrarkc 09-01-2010 09:56 AM
Here is what I am looking for. I am looking for a handle like the ones Finishline has for the T-5 but that will fit the Hurst shifter. I already have a stock Ford handle which I made an adapter to fit but it curves toward the steering wheel and hits it. The finishline ones look straight which will clear the wheel. If no one make this I quess I will have to modify my adapter so that the stock one works.

FatBoy 09-01-2010 10:21 AM
Bill at Southern Automotive has them. I have one from Bill on my toploader with a Hurst shifter. The reverse lockout is sprung-loaded, but doesn't actually do anything.

Paul

FIA-ERA 09-01-2010 05:13 PM
If I remember right the holes didn't line up exactly plus there was the chance of "slop" or movement. I almost made a bracket that took up that extra space and kept the shifter handle in place. I ended up moving it forward as seen. I really think there is a way to fab up a bracket that will work. Can you post some pics? Matt

cobrarkc 09-03-2010 10:22 AM
Looks like I will have to modify something. Just another day in the life a cobra owner.
Thanks for all the responses.

FatBoy 09-03-2010 12:50 PM
Quote:
Originally Posted by cobrarkc (Post 1075810)
Looks like I will have to modify something. Just another day in the life a cobra owner.
Thanks for all the responses.
Why?? :confused:

As I have already said, Southern Automotive have exactly what you are looking for.

http://www.clubcobra.com/photopost/d...PSN0066-sm.jpg

It bolts directly onto the Hurst shifter.

Paul


All times are GMT -7. The time now is 01:29 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: