wiring harness help

cjcady · #1 (**permalink**) 10-02-2001, 06:39 PM

Hey All, Have gotten to the wiring installation on my CMC and needless to say I am thinking of ditching the harness that came with the kit. Can I get some feed back regarding the Painless Harness and the Harness from Finishline as far as ease of installation and reliability. I appreciate any responses. Thanks...

427sharpe · #2 (**permalink**) 10-02-2001, 06:47 PM

The one from Finish Line is top notch and really idiot proof--clearly marked and very easy to install--looks very good when it's in too!

SVMCOBRA · #3 (**permalink**) 10-02-2001, 09:07 PM

I used the painless and was very happy with it, everything is clearly marked. The only thing about the painless harness was that I had to pull the wire loom off the to sort out 2 pink wires in the engine compartment. So while I had it apart I replaced one of the pink wires with a different color.

Also the ground wires for the tail lights need to be grounded to the lights not the frame.

Ray Hedden