|
I agree with the polished slab.
Each geographical area has it's own special requirements that being said I ask three guys biding concrete if they would use the fiber in their concrete. All said no. Wire only with a high psi rated concrete was their recommendation. Dwight |
I used 3000 PSI concrete with #4 rebar on a 24" grid pattern. It was more than what was required here. Mine is smooth finished but I had to put crack (control) joints in and if I had to do that over again, I would cut the crack joints after rather than trowel them in with a tool. My jack falls in the crack joint and I hate that!
Larry |
thank you for posting pics!
here in Manhattan, parking space rent can be anywhere from low $800 to high $2000+++ monthly. |
Jeff: Good luck with the garage build. As you are aware, I gutted my attached (28' x 25') garage and rebuilt from the the ground up with the help of my two son-in-laws and son. Outfitted it with Gladiator cabinetry, rolling stock, 8ft work bench, race deck flooring, TV, Phone, heat, LED Lighting, refrigerator and plenty of power. I needed the loft space, so I had to forego a 4-post lift and opted for a Kwick lift which I purchased from Peter Bayer. I even thought about a pit, but local code rejected it. All sheet rock is 5/8" and insulation is R-13. Have fun with the build and your cars as we all go around only one time!
|
1 Attachment(s)
Well rain set in and progress continued.
Getting close to pouring floor. |
1 Attachment(s)
Smoothed out prepping for Crete
|
Looking good Jeff.
Progress looks to be moving on quickly. Congrats. |
Looking forward to seeing it in person in a few weeks. Great job.
|
1 Attachment(s)
Seemed to have lost a few pics.....
|
1 Attachment(s)
Goofy guy
|
1 Attachment(s)
Update
|
1 Attachment(s)
Ok will Fast forward
|
1 Attachment(s)
TTT with last pic
|
1 Attachment(s)
Update on roof
|
1 Attachment(s)
From the front
|
1 Attachment(s)
Ready to shingle.
|
1 Attachment(s)
Inside will be cool.
|
Looks great!
|
Mortise and tenon! Wow!
Larry |
Very nice!
|
| All times are GMT -7. The time now is 01:47 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: