-
Shop Talk
(
http://www.clubcobra.com/forums/shop-talk/)
| Dwight |
02-02-2002 11:45 PM |
TKO alignment tool????
Can anyone lone or sell me an alignment tool for a TKO clutch?? 26 spline and a shaft size of .665". I bought a GM 26 spline but the shaft is smaller. :CRY: :CRY: :CRY: :CRY: :CRY: :CRY:
|
| CCX33911 |
02-03-2002 07:36 AM |
Do you have a single disk clutch? I have a multipurpose alignment tool. It has a tappered slide to center the clutch (looks like a slide hammer) and interchangeable pilot bearing ends. Works well with single disk clutches. I could loan it too you or find out where I bought this one.
|
| kountzecobra |
02-03-2002 07:44 AM |
I took electrical tape and wrapped it around the shaft until it was the correct outside diameter. It may sound cheesy, but it worked perfectly. I have used it several times.
|
| jwoodard |
02-03-2002 09:57 AM |
Pep Boys
Dwight,
Pep Boys ( if you have them where you live ) sells the universal clutch alignment tool for $20. It'll work great for single clutch disk set ups.
Jim :3DSMILE: :3DSMILE: :3DSMILE:
|
| CCX33911 |
02-03-2002 10:53 AM |
I have used the tape idea also and had sucess. I really have to be careful with my twin disk setup. If it is not just right it is a pain to get the tranny mounted. All of the tools seem to have some slop, etc.
|
| Dwight |
02-03-2002 12:38 PM |
alignment tool
I used the tape, but 'late' last night I tried to install my trannie but could not get it to go in the last inch to 1 & 1/2". I've learned not to forced it. I thought I mite be hitting the pilot bearing a little off center and did not want to damage it. I'll try again. And I may have to make a trip to Pep Boys. Thank for the infor. I thought I was a genius when I came up with the tape thing. Guess not! Oh well, it might work if I adjust the clutch plate a little or tap on the trannie a little.
|
| All times are GMT -7. The time now is 10:31 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
