03-06-2003, 06:21 AM
|
|
CC Member
|
|
|
Join Date: Oct 2000
Location: Crystal Lake,
IL
Cobra Make, Engine: Everett-Morrison, 434 cid
Posts: 977
|
|
Not Ranked
Holley HP - no choke
1. Plug oil heater in and wait 20 minutes (3 gallons oil)
2. Check filter element (screen) for debris on return side of oil system while oil is warming
3. Remove the air cleaner
4. Turn the idle knob in 2 turns (idle screw has been replaced with a knurled knob)
5. Pour a Dixie Cup full of gas down the carb (approx.)
6. Crank over while holding throttle 1/4 open then flip ignition switch on
7. Turn idle down gradually over the next few minutes, replace air cleaner, and unplug oil heater.
8. Drive off
Scott |
Threaded Mode
