Wiring harness choices

Mark Deluca · #1 (**permalink**) 06-20-2003, 08:24 AM

I am currently at the point of installing a wiring harness on my cobra and am wondering what experience others have with the Painless and E-Zwire kits ie. suppport, instructions. quality? I am tossed up as to which one to use. I have a 428 SCJ with a MSD distributer, and Digital 6Plus control module, and using a Ford F600 steering column. Or if there is any other manufacture I should look at.

Roscoe · #2 (**permalink**) 06-20-2003, 09:23 AM

I used the Painless 18 circuit with no problems. I added a relay for the fuel pump and fan. Tech support was good also.
Roscoe

John Poling · #3 (**permalink**) 06-20-2003, 09:25 AM

Mark,
I used the Painless universal 18 circuit for a GM column on mine. I did quite a bit of modifications on mine not related to Painless and I still had no electrical gremlins at all. All circuits are double marked by different colors and circuit numbers/names where they go to and where they come from. Their assmebly manual is exceptional and includes everything for all domestic system hookups.

Painless stands by its name - it has my vote.

John

PSB · #4 (**permalink**) 06-21-2003, 05:19 PM

I've got an EZ wiring harness - it lived up to it's name - very EZ to install. Much cheaper than Painless too.

Pete