|
Data Plates??????????
Does anyone out there know what all those "Numbers" on data plates mean????? I am speaking of the plates on Rear Ends and Transmissions. I have tried and tried to find out what they identify to no avail.....even the local Ford dealership can't help.
The rear end plate is as follows: 201A 2SL73A887D10 (could be 7010) The transmission plate is as follows: F4ZR-7003-AC-REP-BB 1352-238 311352 BD481 (could be BO481) Any help deciphiring these numbers would be "GREATLY" appreciated.......................Thanks, Earl:confused: :confused: Went and double checked....no segments on the rear end plate...just one long sequence. |
The rearend looks like it's an 8.8 2.73 posi, but usually the #'s are separated into segments. 1994 trans is all I can tell right now.
|
Anyone ELSE???????????????????????????????????
|
HELP????????????????????????????? ANYONE KNOW??????
|
|
1352-238 95-97 3.8 265 3.35 1.93 1.29 1.1 0.68 - 3.15 8 7.85 0.668
Info from that web site ID's the tranny as a 3.8 litre?? I pulled it from a 5.0....Now I am really confused!!!!!!!! ANy input from experts?? And, by the way, I had tried a Google search....I guess I did not try the right verbage....Earl |
Howdy, Is the v-6 bellhousing the same as the v-8 bellhousing?
I have a '97 F-150 w/ a 4.2 v-6. Ford said trans will not bolt up to a small block (302-351), but it will. It will not bolt up to a 4.6 v-8. Thanks for the info....Paul. |
Took me a couple of tries on google - what finally got it was the 1352-238.
I was confused on the 3.8 also... My guess is that the case is the same between a lot of the build numbers. For instance look at -246: off of a 94-95 5.0 with the same interface dimensions (input length, speedo gear, etc.) just different ratios. What's the history on the donor car? Are you sure it didn't have a prior swap? Could the id tag have been swapped on a prior rebuild? I'd say check the ratios by counting turns - it may give you some more clues. Does it have the steel or aluminum bearing retainer? Now I found some info for you - find me an assembly drawing on a versailles rear disc brake setup!!! I've come up short on that one!!!! (insert frustrated moan here...) |
Okay, first an apology......I got my ID tags mixed up......the one listed above came off of a T5 transmission.......sorry for the confusion.
The automatics plate is as follows; PHB 29 B23C D 80 PAA And on the case itself it says: D8AP-7006AA Any ideas now that I have the right DATA??? The 1352 is a T5 supposedly out of a 5.0. Thanks for all the great help, Earl |
| All times are GMT -7. The time now is 09:44 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: