Oil Cooler on EM Cobra

[ronzara]

Hey Guys,

I was thinking about adding a Mocal Oil Cooler and Aluminum Shroud (the set up Enzo sells),... anyway, My Everett Morrison Chassis has the Mustang II Front End with a Sway Bar that runs right through the Cooler area,...SEE PIC>>

Am I missing something here??? I don't think there is ROOM for the cooler to fit in there. I have the shroud all ready, and holding it up in place, it looks like it would have to be notched out on either rear side to fit. But then I don't think the Cooler would fit the shroud's pre-punched holes. ANY SUGGESTIONS??
Thanks
Ron

[Roscoe]

Wait until you get the body on to see. You may want to relocate the anti-roll bar.

Roscoe

[rbray]

Ron,
I have a different sway bar setup on my Em that you do. However, judging from the picture I think you will be Ok with Enzos setup. You might call Enzo and order for advice and ask if you can return the parts if they don't fit.

[ronzara]

Roscoe,
The pic was just for reference. This is the car with the body on. you can see the bar really projects out into the oil cooler area. How can this bar be relocated? thanks.
RZ