|
rearend roll up
I guess my thread was lost, I received the snubber I ordered, today, problem is, it is six inches tall all the way down, I only have 4.5 inches clearence from the top of the differential to the bottom of the frame, I will have to cut some of the snubber off, I just don't want to cut it, without some idea of how much clearence I need, any suggestions would be appreciated
|
I mounted the snubber and left about 1/4 inch clearence, ran the car today and didn't have any bang, I am running the Mustang GT rearend with the four link hookup and QA1 coilovers, it also has an extra shock on each side, that was supposed to stop rearend roll up, didn't work very well, hope this info helps someone
|
| All times are GMT -7. The time now is 12:33 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: