rearend roll up

jarendall · #1 (**permalink**) 03-16-2006, 06:39 PM

I guess my thread was lost, I received the snubber I ordered, today, problem is, it is six inches tall all the way down, I only have 4.5 inches clearence from the top of the differential to the bottom of the frame, I will have to cut some of the snubber off, I just don't want to cut it, without some idea of how much clearence I need, any suggestions would be appreciated

jarendall · #2 (**permalink**) 03-22-2006, 08:09 PM

I mounted the snubber and left about 1/4 inch clearence, ran the car today and didn't have any bang, I am running the Mustang GT rearend with the four link hookup and QA1 coilovers, it also has an extra shock on each side, that was supposed to stop rearend roll up, didn't work very well, hope this info helps someone