remote oil filter bracket dimensions?

rob frink · #1 (**permalink**) 04-03-2006, 11:27 AM

I need the dimensions for the 3 bolt pattern to mount this type of oil filter bracket.

It looks like several companies sell the same bracket under different brand names such as perma cool and transdapt. Last week I found it online with a drawing that had the over-all dimensions and the bolt pattern. I didn't book mark the web site...and now I can't find it. I can find plenty of photos...but no drawings with the dimensions.

Any help??

Thanks,
Rob

sharpe 1 · #2 (**permalink**) 04-03-2006, 12:15 PM

If I had the unit I would make a pattern from it to drill my holes. I may be missing the point?

EarlsflyinCobra · #3 (**permalink**) 04-03-2006, 01:20 PM

Rob, I went out and got mine out of the truck (truck is temporarily a parts house on wheels) and it is totally different than the one in your picture...sorry, can't help, Earl

LMH · #4 (**permalink**) 04-03-2006, 01:31 PM

I know a few people who have trouble with that particular adapter. Seems to leak around the seal on the filter.
Others have had no trouble but thought you might want to know.
Larry

rob frink · #5 (**permalink**) 04-03-2006, 01:38 PM

I'm making a new design from Billet...and I want it to be interchangable with the type in the photo. I've measured one the best that I can ...but I would much rather get the dimension from a print. I've seen a print on the web...but can't find it now. My CNC machine needs coordinates for the hole locations.

Thanks anyway...I'm still looking.

Roscoe · #6 (**permalink**) 04-04-2006, 06:46 AM

I got one of these from cvproducts.com