Looking for source of Lexan MR10

[elgecko]

Looking for a source of Lexan Polycarbonate MR10 sheet .250 thickness.
Anyone know of a supplier in the Southwest area..... Dallas, OKC, New Mexico???
Thanks
Dave

[bamcoc5]

Please call this number on Tuesday. This is the number for GE PLASTIC
1-800-PLASTIC. They will give the phone number of their local distributor. I purchase it directly from GE here in Philly for my customers. I hope this helps.
PS they also do custom cuts.

Have a HAPPY HOLIDAY.

[J Persons]

You might try www.mcmaster.com These guys have everything. I don't know if they have a mid West warehouse, burt it's worth a try. John

[elgecko]

I checked McMasters. They have a 48x96 sheet but I really need 60x96 sheet. The expense of Motor freight shipping is also of concern.
I'll also check GE.
Dave

[Rick Yeager]

Not meaning to hijack a thread but while we are on the subject--kind of, what is the best way to cut lexan?

RB

[elgecko]

A good jigsaw and a blade suitable for plastic will work. I know it works on 1/4" stuff. Be sure to leave protective paper on lexan while you cut.

[wyocobra]

Try outwaterplastics.com Lots of fun stuff.

[G.R.]

Do you have a Tap Plastic franchise in your area? They can get/or have on hand most any type of plastic or Lexan or they can order it. No frieght charges unless you choose to have it shipped to your home.

[Rick Yeager]

Thank you for taking time for the suggestions. It just never seemed to work smoothly for me. I think that it seemed like the plastic was trying to melt back together or something.

Thanks for letting me side track the subject for a second. Now back to the sources for the stuff.

RB

[Ant]

Looking up the data on Lexan MR10, specs say its best used on flat areas and it isnt cold formable!

I assume it needs some heat maybe from a heat gun to curve it to the Cobra windscreen shape, any data on this or refer to any posts would be appreciated?