Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Small Block Talk (http://www.clubcobra.com/forums/small-block-talk/)
-   -   The glorious sound of 7000 rpm... (http://www.clubcobra.com/forums/small-block-talk/129788-glorious-sound-7000-rpm.html)

blykins 07-22-2014 04:41 AM

The glorious sound of 7000 rpm...
 
Ok, so not a Cobra, but I just wanted to post this video just to share the sound of an engine getting up on the cam and spinning to 7000 rpm.

This is a 408C that I built a few years back for a customer's '69 Mustang. It made 575 hp @ 6600 on the dyno here. Pump gas, mild-ish solid roller, CHI heads, etc.

At first, the owner just wanted a fun little street engine to push his Mustang around, but he has ever-so-slowly inched his way into bracket racing....and now has decided to make it a track-only car.

He's running a manual valve body C4, with a 4.10 gear out back. Obviously, he has some chassis and converter tuning to do, but he's snapping off consistent 11 flats at 124 mph. You can tell that the engine is begging for more torque converter, as he's launching off the trans-brake at 3000 rpm, and the engine doesn't really start making horsepower until 4500-5000 rpm. I think he's ordering a new torque converter today and I would expect to see some mid to upper 10 second 1/4's after he gets the suspension and traction lined out.

Turn up the volume...

[ame=http://www.youtube.com/watch?v=l6WPCscsalY&feature=youtu.be]July 18, 2014 at Kansas International 11.05 at 124.41 - YouTube[/ame]

[ame=http://www.youtube.com/watch?v=Hkfw9Z8Dsxw&feature=youtu.be]KANSAS INTERNATIONAL 7-19-14 11.11 124.93 - YouTube[/ame]

THAT is one of the reasons I love building engines....

ACademic 07-22-2014 07:47 AM

It really showed a lot of top end charge in that second video. Nice!

blykins 07-22-2014 07:56 AM

I'm not sure if he just passed him hard, or if the Nova tapped the brakes so he wouldn't break out.

Either way, it does seem to be coming on hard, and just needs a good solid hole shot.

*13* 07-22-2014 11:48 AM

Love the sound!

blykins 10-13-2014 05:05 AM

A few changes later....10.70 with same car and engine.

[ame]https://www.youtube.com/watch?v=yFZq3ZiCP4U&feature=youtu.be[/ame]

SPF1061 10-13-2014 05:19 AM

Oh yeah, that launch was much stronger. Sweet. That looks like fun.

blykins 10-13-2014 05:24 AM

Had him go to a looser converter and a set of 4.56 gears. He was racing Saturday in Kansas and it was very cold....was having trouble snagging traction.

QWIK 1 10-19-2014 08:23 PM

Here's even more rpm.

[ame]https://www.youtube.com/watch?v=QcuTkbDlFSg[/ame]

Love that Cleveland sound tho!

Rick Parker 10-20-2014 11:54 AM

7200 Through the lights..... nice!


All times are GMT -7. The time now is 01:10 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: