looking for adapter plates to put 302 intake on a 351w

133bus · #1 (**permalink**) 10-12-2018, 09:18 AM

Found a Weber 48IDA intake...only thing is its for a 302 and I have a 351w...I know that there are plates to adapt the intake to a 351w and was wondering if anyone would have a set that would be for sale...Also anyone with any experience with these adapters and has an opinion on how they work would be appreciated...I have an add in the Wanted Stuff but not everyone looks there,so thought I would put a request on here ...Thanks Steve

cycleguy55 · #2 (**permalink**) 10-12-2018, 01:32 PM

Price Motorsport Intake Adapters:Intake Adapters

1795 · #3 (**permalink**) 10-12-2018, 01:40 PM

You might want to check the height of the adapter plate and add that to the height of the Weber intake and carbs to make sure that it will fit under your hood. It probably does not add a lot to the height, but some of our cars have limited clearance. Let us know what you find out. I have no experience with adapter plates so cannot offer any advice.

Jim

133bus · #4 (**permalink**) 10-13-2018, 12:20 PM

Thanks for the replies...I know about Price Motorsport..beautiful products..I thought that there may be someone here on this site that has a set not being used and would want to move them along...Thanks Steve

PANAVIA · #5 (**permalink**) 10-15-2018, 12:58 PM

I have a 351W Webber intake i could part with - might save you a nightmare/.

133bus · #6 (**permalink**) 10-15-2018, 03:07 PM

Panavia...I've send a private message