quick fuel brawler 750 street vs

ErikinSC · #1 (**permalink**) 05-04-2022, 09:44 AM

Does anyone have any information / opinions on a Quick Fuel Brawler 750 Street vs any other carb options? Looking to replace the Avenger with a more tunable carb….. TIA. (No photos loaded since I’m a NOOB)

jknich · #2 (**permalink**) 05-04-2022, 10:43 AM

The Quick Fuel HR series with mechanical secondaries is my favorite. I see Edelbrock is now making a Holley copy too. On the Quick Fuel look on their refurbished page for deals about half price. HR series comes in 735cfm and 780cfm vacuum secondary and 750cfm mechanical. Here is an example with vacuum secondaries:

https://www.holley.com/products/fuel...ts/FRHR-735-VS

eschaider · #3 (**permalink**) 05-04-2022, 11:03 AM

The new Edelbrock, Holley look-a-likes have the greatest tunability potential of the available Holley look-a-likes I've seen so far. They have easily accessible and user replaceable metering jets/orifices for the air bleeds, emulsion circuits and main jets. It looks like a pretty nice carb.

tonywyso · #4 (**permalink**) 05-04-2022, 02:31 PM

Check out AED Performance in VA., they will build you a custom carb. I ordered one from them, works very good. Great service and tech advice.

dblbarrel · #5 (**permalink**) 05-05-2022, 01:27 PM

I second AED, love mine

undy · #6 (**permalink**) 05-06-2022, 05:58 AM

I have twin QuickFuel 750s 4bbls on a tunnel Wedge intake on my 482" KC side-oiler and they're great. They were custom built expressly for my engine by QuickFuel. They were/are Outstanding! On the chassis dyno the car had a 14.5 AFR at idle and a consistent 12.4 AFR at WOT. Perfection!