09-05-2003, 03:01 PM
|
|
CC Member
|
|
|
Join Date: May 2003
Posts: 37
|
|
Not Ranked
Ok......back to ththread guys, instead of making a new one.
First off...fxbill, I think I'll call Comp cams and havethem make me one. Same way almost, like a freight train from idle to around 6k, good vacumn, and a really nasty idle.
-If i tell them motor size and mods, they'll make sure they get the right one? Would they also recommend if I should stick with a roller or switch to a flat tappet?
Secondly, I'm looking at the Edelbrock Performer and Performer RPM heads. Should I stick with 1.90/1.60 valves or get the larger 2.02/1.60 valves? Do the '91 Ford 302 H.O. motors have the notched pistons for the 2.02 valves? Or do I have to stick with the smaller 1.90 valves?
Third, Hows a Perormer dual pane intake sound to top it off?
Finally, whats it take to stroke a motor?
|
Threaded Mode
