|
I agree, hate the "endurashine!" Thanks for the info!
|
Manowar:
Is that on a 351W or a 302? If it is on a 351W will I have room for a large std. distributor Duraspark Cap or will I have to go to a smaller size like the MSD you show in the pics. Still waiting to see if anyone bought the 351W Edelbrock set-up. I know people say it is the same as the 302 just a different intake, but still I'm looking for some history and satisfaction comments, $995 from Summit (not Endurashine finish on the intake). Jim |
That is on a 9.5 deck Man O'War (Not an OE 351) w/two 500 cfm Eddies.
Sorry those MSD are all we use and have not tested the OE large-cap distributors. Of course it's only a brief dyno test (8 pulls plus run-in) and not road miles but they idled beautifully with no changes and made 12.5 A/F's all the way to the top. Made 10 less HP but 15 more lb-ft than our normal 870 single plane combination. Hope that helps. |
endurashine is an option on most all Edelebrock parts. fsstnotch, I'm also a Holley hater...
|
G.R.
Can you get the carbs withotu being endurashine anymore? i guess you could alwasy pull it apart and powdercoat it! Kinda defeats the purpose of buying a new carb though. Manowar, What cam/head specs were used for the dyno? 351 bore or stroker? Just curious! |
Fsst,
That engine is our 427 World Class (4.125 x 4.00), rated at 495/485. The cam is hydraulic w/ 554/558, 250/256 @ .050 on 108CL. The heads are our Windsor Senior aluminums, 2.08 x 1.60. The quads made 500 lb-ft at 3800 if memory serves. The story and specs can be seen here: http://www.theengineshop.com/prods_pages/102035.htm |
fsstnotch,
As far as I know the Edlebrock carbs are available in both cast and Endurashine except for the 500cfm it was available only in cast according to the '07 Edelbrock catalog. Now it looks like the 500's are available in the Endurashine with the release of the 2-4 manifold. You could call them to see if the 2-4 setup is available cast Phone: 310-781-2222.... 8-5 pst, closed 12:00-1:30 |
Quote:
|
| All times are GMT -7. The time now is 05:18 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: